Additive Manufacturing of 17 – 4 PH Stainless Steel by High-speed Laser Directed Energy Deposition

被引：0

作者：

Platz J. ^{[1
]}

Schmidt M. ^{[1
]}

Gutzeit K. ^{[1
]}

Kirsch B. ^{[1
]}

Aurich J.C. ^{[1
]}

机构：

[1] Maschinenbau an der Technischen Universität, Kaiserslautern

来源：

ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb | 2022年 / 117卷 / 7-8期

关键词：

17–4; PH; Additive Manufacturing; High-speed Laser Directed Energy Deposition; Laser Technology;

D O I：

10.1515/zwf-2022-1087

中图分类号：

学科分类号：

摘要：

Additive Manufacturing of 17–4 PH Stainless Steel by High-speed Laser Directed Energy Deposition. High-speed laser directed energy deposition (HS L-DED) represents an innovative approach to additive manufacturing of metals. By significantly increasing the deposition rates compared to conventional processes, such as the powder bed process, productivity can be increased and thus the barrier to the economic use of additive manufacturing can be overcome. Due to the low lev-el of technological maturity of the HS L-DED process, there are only a few materials that have been used so far. Due to its combination of corrosion resistance, mechanical strength and hardness, 17–4 PH stainless steel is an industrially used material for which appro-priate parameters for the HLA process were determined within this study. © 2022 Walter de Gruyter GmbH, Berlin/Boston, Germany.

引用

页码：456 / 460

页数：4

共 50 条

[21] Working distance passive stability in laser directed energy deposition additive manufacturing [J].

Haley, James C. ;

Zheng, Baolong ;

Bertoli, Umberto Scipioni ;

Dupuy, Alexander D. ;

Schoenung, Julie M. ;

Lavernia, Enrique J. .

MATERIALS & DESIGN, 2019, 161 :86-94

[22] Data-Driven Modeling of Mechanical Properties for 17-4 PH Stainless Steel Built by Additive Manufacturing [J].

Michael Porro ;

Bin Zhang ;

Akanksha Parmar ;

Yung C. Shin .

Integrating Materials and Manufacturing Innovation, 2022, 11 :241-255

[23] Data-Driven Modeling of Mechanical Properties for 17-4 PH Stainless Steel Built by Additive Manufacturing [J].

Porro, Michael ;

Zhang, Bin ;

Parmar, Akanksha ;

Shin, Yung C. .

INTEGRATING MATERIALS AND MANUFACTURING INNOVATION, 2022, 11 (02) :241-255

[24] The effect of printing parameters on the properties of 17-4 PH stainless steel fabricated by material extrusion additive manufacturing [J].

Seensattayawong, Phanuphak ;

Suwanpreecha, Chanun ;

Boonlert, Natthanicha ;

Songkuea, Sukrit ;

Manonukul, Anchalee .

JOURNAL OF METALS MATERIALS AND MINERALS, 2024, 34 (02)

[25] Laser Directed Energy Deposition of Bulk 316L Stainless Steel [J].

Ascari A. ;

Lutey A.H.A. ;

Liverani E. ;

Fortunato A. .

Lasers in Manufacturing and Materials Processing, 2020, 7 (04) :426-448

[26] Synergistically enhanced cryogenic strength and ductility in 304L stainless steel made by directed energy deposition additive manufacturing [J].

Chang, Yen-Ting ;

Enriquez, Andrew Hattoon ;

Nie, Yuheng ;

Oladeji, Didun ;

Charpagne, Marie A. .

MATERIALS & DESIGN, 2025, 253

[27] Additive manufacturing of cobalt-based alloy on tool steel by directed energy deposition [J].

Zhang, Xinchang ;

Li, Wei ;

Liou, Frank .

OPTICS AND LASER TECHNOLOGY, 2022, 148

[28] Review of online quality control for laser directed energy deposition (LDED) additive manufacturing [J].

Ye, Long ;

Xue, Hao ;

Li, Zhaosheng ;

Zhou, Yichang ;

Chen, Guangyu ;

Xu, Fangda ;

Melentiev, Ruslan ;

Newman, Stephen ;

Yu, Nan .

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING, 2025, 7 (06)

[29] Influence of aging treatments on 17–4 PH stainless steel parts realized using material extrusion additive manufacturing technologies [J].

Alessandro Pellegrini ;

Fulvio Lavecchia ;

Maria Grazia Guerra ;

Luigi Maria Galantucci .

The International Journal of Advanced Manufacturing Technology, 2023, 126 :163-178

[30] Mechanical Properties and Fatigue Performance of 17-4 PH Stainless Steel Manufactured by Atomic Diffusion Additive Manufacturing Technology [J].

Rodriguez, Jon ;

Zuriarrain, Aitor ;

Madariaga, Aitor ;

Arrazola, Pedro J. ;

Dominguez, Erika ;

Fraile, Itziar ;

Soler, Daniel .

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2023, 7 (05)

← 1 2 3 4 5 →