A Fault Diagnosis Method for Complex Analog Circuits Based on IMODA Adaptive Deep Belief Network

被引:0
作者
Gong B. [1 ]
An A. [1 ,2 ]
Shi Y. [3 ]
Du X. [1 ,2 ]
机构
[1] College of Electrical and Information Engineering, Lanzhou University of Technology, Lanzhou
[2] Key Laboratory of Gansu Advanced Control for Industrial Processes, Lanzhou University of Technology, Lanzhou
[3] School of Computer and Communication, Lanzhou University of Technology, Lanzhou
来源
Dianzi Keji Daxue Xuebao/Journal of the University of Electronic Science and Technology of China | 2024年 / 53卷 / 03期
关键词
adaptive learning rate; analog circuit; deep belief network; fault diagnosis; MODA algorithm;
D O I
10.12178/1001-0548.2023047
中图分类号
学科分类号
摘要
Aiming at the problems of time-consuming pre-training and poor diagnostic accuracy in the process of unsupervised training of traditional Deep Belief Network (DBN), In this paper, an Improved Multi-Objective Dragonfly Optimization Adaptive Deep Belief Network (IMOD-ADBN) is proposed for analog circuit fault diagnosis. Firstly, an adaptive learning rate is proposed according to the similarities and differences of parameter update directions to improve the convergence speed of the network. Secondly, traditional DBN uses Back Propagation (BP) algorithm in the supervised tuning process. However, BP algorithm has the problem that it is easy to fall into local optimum. In order to improve the problem, IMOD algorithm is used to replace BP algorithm to improve the accuracy of network classification. In the improved MODA algorithm, Logistic chaotic imprinting and oppositional jumping are added to obtain the Pareto optimal solution, which increases the diversity of the algorithm and improves its performance of the algorithm. The proposed algorithm is tested on eight multiobjective mathematical benchmark problems and compared with three meta-heuristic optimization algorithms (MODA, MOPSO, and NSGA-II), and the stability of IMOD-ADBN network model is proved. Finally, IMOD-ADBN is applied to the diagnosis experiment of a two-stage four-op-amplifier double-second-order low-pass filter. The experimental results show that the proposed IMOD-ADBN can ensure classification accuracy on the basis of fast convergence, and IMOD-ADBN has higher diagnosis rate than other methods mentioned in this paper, which can realize the classification and location of high-difficulty faults. © 2024 University of Electronic Science and Technology of China. All rights reserved.
引用
收藏
页码:327 / 344
页数:17
相关论文
共 49 条
[1]  
SAI S V A, LONG B, PECHT M., Diagnostics and prognostics method for analog electronic circuits, IEEE Transactions on Industrial Electronics, 60, 11, pp. 5277-5291, (2013)
[2]  
AO Y, SHI Y, WEI Z, Et al., An approximate calculation of ratio of normal variables and its application in analog circuit fault diagnosis, Journal of Electronic Testing Theory & Applications, 29, 4, pp. 555-565, (2013)
[3]  
YANG C L., Parallel-series multi objective genetic algorithm for optimal tests selection with multiple constraints, IEEE Transactions on Instrumentation and Measurement, 67, 8, pp. 1-18, (2018)
[4]  
TANG X, XU A., Practical analog circuit diagnosis based on fault features with minimum ambiguities, Journal of Electronic Testing, 32, 1, pp. 1-13, (2016)
[5]  
TADEUSIEWICZ M, HALGAS S., A method for local parametric fault diagnosis of a broad class of analog integrated circuits, IEEE Transactions on Instrumentation and Measurement, 67, 2, pp. 328-337, (2018)
[6]  
AMINIAN M, AMINIAN F., A modular fault-diagnostic system for analog electronic circuits using neural networks with wavelet transform as a preprocessor, IEEE Transactions on Instrumentation and Measurement, 56, 5, pp. 1546-1554, (2007)
[7]  
LAURAIN V, TOTH R, PIGA D, Et al., An instrumental least squares support vector machine for nonlinear system identification, Automatica, 54, pp. 340-347, (2015)
[8]  
HU Q L, XIAO B., Adaptive fault tolerant control using integral sliding mode strategy with application to flexible spacecraft, International Journal of Systems Science, 44, 12, pp. 2273-2286, (2013)
[9]  
DUAN C D, HE Z J, JIANG H K., Fault feature extraction using nonlinear wavelet transform, Journal of Vibration Engineering, 1, pp. 129-132, (2005)
[10]  
COHEN A, TIPLICA T, KOBI A., Design of experiments and statistical process control using wavelets analysis, Control Engineering Practice, 49, 4, pp. 129-138, (2016)