Measurement principle and structure optimization of two-dimensional displacement sensor based on planar standing wave magnetic field

被引:0
作者
Wu L. [1 ]
Wang X. [1 ]
Tong P. [1 ]
Xu S. [1 ]
机构
[1] Engineering Research Center of Mechanical Testing Technology and Equipment, Ministry of Education, Chongqing University of Technology, Chongqing
来源
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument | 2021年 / 42卷 / 09期
关键词
Coordinate rotation digital computer algorithm; Planar standing wave magnetic field; Spiral coil; Two-dimensional displacement measurement;
D O I
10.19650/j.cnki.cjsi.J2108211
中图分类号
学科分类号
摘要
In chip manufacturing, intelligent manufacturing, aerospace and other fields, precise plane positioning urgently needs synchronous independent precise measurement of two-dimensional displacement. In this article, a planar displacement sensor based on the principle of electromagnetic induction is proposed, which consists of a moving front and a fixed front. The fixed array includes m×n planar spiral coil arrays in series. The planar standing wave magnetic field array is generated on the measuring plane when 4 kHz AC current is applied. The moving front is arranged by four spiral coils in the form of 2×2 matrix, and four-channel modulation signals whose amplitude changes with the displacement of x axis and y axis are induced. The Cordic algorithm is used to solve the displacement of two dimensions. This article first introduces the structure and working principle of the sensor. The finite element analysis is implemented to the electromagnetic model, and numerical simulation is applied to the dislocation algorithm. According to simulation results, the measurement error is analyzed and traced, and the sensor structure is optimized. The sensor prototype is made and the experimental verification is carried out, which verifies the feasibility of the decoupling method of sensor structure and position shift. The maximum error of the sensor in the counter pole is 48.7 μm. And the sensor resolution is 0.317 μm. Experimental results show that the linearity of the sensor reaches 0.15% within the range of 147 mm×147 mm, which provides theoretical support and experimental guidance for the further development of the high-precision two-dimensional time-gate displacement sensor. © 2021, Science Press. All right reserved.
引用
收藏
页码:225 / 235
页数:10
相关论文
共 26 条
  • [1] GAO W, KIM S W, BOSSE H, Et al., Measurement technologies for precision positioning, CIRP Ann.Manuf.Technol, 64, pp. 773-796, (2015)
  • [2] LIU C H, JYWE W Y, Et al., Design and control of a long-traveling nano-positioning stage, Precis. Eng, 34, 3, pp. 497-506, (2010)
  • [3] YAGUE J A, AGUILAR J, VALENZUELA M, Et al., Traceability in the calibration of low cost opto-eletronic sensors for measuring 2D displacement, AIP Conf. Proc, 1181, pp. 244-253, (2009)
  • [4] ZHANG R, HUANG Q X, WU T T, Et al., Research of compensating angle error to the 2D stage in real time, China Measurement & Test, 44, 8, pp. 102-106, (2018)
  • [5] KIM J A, KIM J W, KANG C S, Et al., On-machine calibration of angular position and runout of a precision rotation stage using two absolute position sensors, Measurement, 153, pp. 1-7, (2019)
  • [6] WU L, XU S, ZHONG Z, Et al., An inductive sensor for two-dimensional displacement measurement, Sensors, 20, 7, pp. 1819-1833, (2020)
  • [7] WU L, TANG Q, CHEN X, Et al., A novel two-dimensional sensor with inductive spiral coils, IEEE Sens. J, 19, 1, pp. 4857-4865, (2019)
  • [8] ZHANG Y H., Study on 2D wide-range, high-precision displacement measuring method and system based on planar capacitive sensor with direct decoupling effect, (2008)
  • [9] WANG B B, YUE J F, ZHOU Z B, Et al., Two-dimensional nano-positioning system combined with two-dimensional capacitive displacement sensor, Nanotechnology and Precision Engineering, 3, 2, pp. 137-141, (2005)
  • [10] YU J P, WANG W, LI X, Et al., A novel quadrature signal estimation method for a planar capacitive incremental displacement sensor, Meas. Sci. Rev, 16, pp. 127-133, (2016)