Reliability analysis of command and control network system based on generalized continuous time Bayesian network

被引:0
|
作者
Li Y. [1 ,2 ]
Qian H. [2 ,3 ]
Huang H. [1 ,2 ]
Zhang T. [1 ,2 ]
Huang T. [1 ,2 ]
机构
[1] School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu
[2] Center for System Reliability and Safety, University of Electronic Science and Technology of China, Chengdu
[3] State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing
关键词
Bayesian network; command and control network; conditional probability table of two states; reliability analysis;
D O I
10.12305/j.issn.1001-506X.2022.12.34
中图分类号
学科分类号
摘要
As a typical complex network system, the reliability of command and control network can usually be analyzed by using dynamic Bayesian network (DBN). However, DBN cannot solve the reliability problem of command and control network system including time and non-time events. To end this, a modeling method of generalized continuous time Bayesian network (GCTBN) with two state conditional probability table is proposed. Based on this model, the reliability algorithm of different logic gates is proposed, and the reliability analysis method of wireless propagation, communication devices and network is proposed for command and control network system, so as to comprehensively consider the reliability problem of command and control network to perform different tasks. The effectiveness of the proposed method is verified by a real case study of command and control network reliability. © 2022 Chinese Institute of Electronics. All rights reserved.
引用
收藏
页码:3880 / 3886
页数:6
相关论文
共 25 条
  • [1] LIU Q, RENIERS A C F, JOHANNSEN U, Et al., Improved probing reliability in antenna-on-chip measurements, IEEE Antennas and Wireless Propagation Letters, 17, 9, pp. 1745-1749, (2018)
  • [2] LAN Y S, YI K, WANG H, Et al., Delay assessment method for networked C4ISR system architecture, Systems Engineering and Electronics, 35, 9, pp. 1908-1914, (2013)
  • [3] ZHANG M M, CHEN H H, LUO A M, Et al., C4ISR system structure flexibility analysis based on dynamic adjustment, Systems Engineering and Electronics, 38, 3, pp. 563-568, (2016)
  • [4] PARK J H., Time-dependent reliability of wireless networks with dependent failures, Reliability Engineering & System Safety, 165, pp. 47-61, (2017)
  • [5] LI B, SALUCCI M, TANG W, Et al., Reliable field strength prediction through an adaptive total-variation CS technique, IEEE Antennas and Wireless Propagation Letters, 19, 9, pp. 1566-1570, (2020)
  • [6] BEKASIEWICZ A, KOZIEL S., Reliable multistage optimization of antennas for multiple performance figures in highly dimensional parameter spaces[J], IEEE Antennas and Wireless Propagation Letters, 18, 7, pp. 1522-1526, (2019)
  • [7] SULYMAN A I, NASSAR A T, SAMIMI M K, Et al., Radio propagation path loss models for 5G cellular networks in the 28 GHz and 38 GHz millimeter-wave bands, IEEE Communications Magazine, 52, 9, pp. 78-86, (2014)
  • [8] ZADEHPARIZI F, JAM S., Increasing reliability of frequency-reconfigurable antennas, IEEE Antennas and Wireless Propagation Letters, 17, 5, pp. 920-923, (2018)
  • [9] XIANG S H, YANG J., Performance reliability evaluation for mobile ad hoc networks, Reliability Engineering & System Safety, 169, pp. 32-39, (2018)
  • [10] HATA M., Empirical formula for propagation loss in land mobile radio services, IEEE Trans, on Vehicular Technology, 29, 3, pp. 317-325, (1980)