Effects of freeze-thaw cycles on interfacial bonding property of CFRP-sintered clay brick

被引：0
|
作者：
Jin W. [1 ,2 ]
Zhao J. [1 ,2 ]
Wang Q. [3 ]
Guo L. [1 ]
Nie D. [1 ]
机构：
[1] School of Civil Engineering, Lanzhou Jiaotong University, Lanzhou
[2] National and Provincial Joint Engineering Laboratory of Road Bridge Disaster Prevention and Control, Lanzhou Jiaotong University, Lanzhou
[3] China Railway Design Corporation, Tianjin
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2020年 / 37卷 / 09期
关键词：
CFRP; Clay brick; Composite; Durability; Freeze-thaw cycle; Interfacial bond behavior;
D O I：
10.13801/j.cnki.fhclxb.20200111.002
中图分类号：
学科分类号：
摘要：
In order to investigate the effects of freeze-thaw cycles on the interface bonding performance of carbon fiber reinforced polymer composite(CFRP)-sintered clay brick, a single-sided shear test was conducted on the test specimens after different times of freeze-thaw cycles by simulating the natural freeze-thaw environment. The test results show that under the action of freeze-thaw cycles, the bond performance of the CFRP-sintered clay brick has been obviously degraded. Therefore, as the number of freeze-thaw cycles increases, the interface bearing capacity and shear stress continuously decrease. The distribution of the interface shear stress under different freeze-thaw times is similar, and they all show that the shear stress gradually passes from the loading end to the free end, while the effective transfer length doesn't change significantly. Based on the existing interface theory, the interface bond-slip model considering the freeze-thaw cycles was proposed according to the experiment. Through contrast analysis, the model can well reflect the degradation law of the interface bond performance under the action of freeze-thaw cycles. © 2020, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.
引用
收藏
页码：2294 / 2302
页数：8
相关论文
共 20 条
  • [1] SATO Y, KIMURA K, KOBATAKE Y., Bond behavior between CFRP sheet and concrete (Part 1), Journal of Structural and Construction Engineering, 500, pp. 75-82, (1997)
  • [2] DENG Zongcai, NIU Cuibing, DU Xiuli, Et al., Durability of FRP strengthened concrete structure, Journal of Beijing University of Technology, 32, 2, pp. 133-137, (2006)
  • [3] SMITH S T, TENG Jinguang, CHEN Jianfei, Et al., FRP reinforced concrete structure, (2004)
  • [4] FENG Peng, LU Xinzheng, YE Lieping, Infrastructure application of FRP composites, (2009)
  • [5] PETERSEN R B, MASIA M J, SERACINO R., In-plane shear behavior of masonry panels strengthened with NSM CFRP strips Ⅱ: Finite-element model, Journal of Composites for Construction, 14, 6, pp. 764-774, (2010)
  • [6] MAHINI S. S., Smeared crack material modeling for the nonlinear analysis of CFRP-strengthened historical brick vaults with adobe piers, Construction and Building Materials, 74, pp. 201-218, (2015)
  • [7] GU Qian, PENG Bo, LIU Weiguo, Et al., Experimental investigations and analysis of shear capacity ofmasonry wallswith window and door openings reinforced with CFRP sheets, Journal of Building Structures, 28, 1, pp. 80-88, (2007)
  • [8] GUO Zhanggen, LIU Jialiang, SUN Weimin, Et al., Research and application of FRP reinforced masonry structures, Journal of Nanjing University of Technology(Natural Science Edition), 1, pp. 105-110, (2008)
  • [9] WANG Zuohu, YANG Wenxiong, LIU Du, Research progress on interface bonding properties ofmasonry structures strengthened by FRP sheets, Fiber Reinforced Plastics/Composites, 1, pp. 103-107, (2018)
  • [10] HUAN Wenjuan, ZHANG Yunsheng, LIU Guojian, Et al., Performance deterioration and microstructure evolution ofclay brick submitted to freeze-thaw cycles, Journal of Southeast University(Natural Science Edition), 44, 2, pp. 401-405, (2014)
12