Experimental Study on the Mechanism of Internal Short Circuit by Nail Penetration for Lithium Titanate Power Battery

被引：0
|
作者：
Zhou X. [1 ]
Sun B. [1 ]
Zhang W. [1 ]
Wang Z. [1 ]
Huang Q. [1 ]
机构：
[1] National Active Distribution Network Technology Research Center, Beijing Jiaotong University, Beijing
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2023年 / 59卷 / 22期
关键词：
internal short-circuit; lithium titanate; nail penetration; power battery;
D O I：
10.3901/JME.2023.22.111
中图分类号：
学科分类号：
摘要：
The risk of battery internal short circuit is an important factor in evaluating the safety characteristics of batteries. Through the experimental study of four typical lithium titanate power batteries under two different charge states, the risk characteristics of lithium titanate power batteries in the needling internal short circuit scenario are analyzed, and the reaction mechanism and influencing factors are studied by combining material characterization and P2D model simulation analysis. The results of the study indicate that the lower conductivity of the negative material can effectively reduce the current density during the short-circuit process between the negative material and the positive collector, which reduces the risk of the internal short-circuit and makes the lithium titanate battery have a strong resistance to needling abuse. In the overcharge state needling, there are three risk states, which including complete thermal runaway, partial thermal runaway and no thermal runaway. The battery reaction intensity is affected by the battery packaging form and separator type, and it is proved that the battery reaction intensity is negatively correlated with the amount of separator ceramic coating. The research results provide a reference for improving the safety design of internal short circuit of the lithium-ion battery. © 2023 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：111 / 123
页数：12
相关论文
共 21 条
  • [1] FENG Xuning, OUYANG Minggao, LIU Xiang, Et al., Thermal runaway mechanism of lithium ion battery for electric vehicles:A review, Energy Storage Materials, 10, pp. 246-267, (2018)
  • [2] HSIN W, ZHU Xiaoqing, WANG Zhenpo, HSIN W, Et al., Review of thermal runaway and safety management for lithium-ion, Journal of Mechanical Engineering, 56, 14, pp. 91-118, (2020)
  • [3] FENG Xuning, REN Dongsheng, HE Xiangming, Et al., Mitigating thermal runaway of lithium-ion batteries[J], Joule, 4, 4, pp. 743-770, (2020)
  • [4] ZHONG Guobin, MAO Binbin, WANG Chao, Et al., Thermal runaway and fire behavior investigation of lithium ion batteries using modified cone calorimeter[J], Journal of Thermal Analysis and Calorimetry, 135, 5, pp. 2879-2889, (2019)
  • [5] WANG Qingsong, MAO Binbin, STANISLAV I, Et al., A review of lithium ion battery failure mechanisms and fire prevention strategies[J], Progress in Energy and Combustion Science, 73, pp. 95-131, (2019)
  • [6] CHEN Zeyu, XIONG Rui, SUN Fengchun, Research status and analysis for battery safety accidents in electric vehicles, Journal of Mechanical Engineering, 55, 24, pp. 93-104, (2019)
  • [7] HUANG Zonghou, LI Huang, MEI Wenxin, Et al., Thermal runaway behavior of lithium iron phosphate battery during penetration[J], Fire Technology, 56, 6, pp. 2405-2426, (2020)
  • [8] KONDRAKOV A, GEBWEIN H, GALDINA K, Et al., Charge transfer-induced lattice collapse in Ni-rich NCM cathode materials during delithiation[J], The Journal of Physical Chemistry, 121, 44, pp. 24381-24388, (2017)
  • [9] KONDRAKOV A, SCHMIDT A, XU J, Et al., Anisotropic lattice strain and mechanical degradation of high- and low-nickel NCM cathode materials for Li-ion batteries, The Journal of Physical Chemistry, 121, 6, pp. 3286-3294, (2017)
  • [10] MAO Binbin, CHEN Haodong, CUI Zhixian, Et al., Failure mechanism of the lithium ion battery during nail penetration[J], International Journal of Heat and Mass Transfer, 122, pp. 1103-1115, (2018)
123