Separation of RDX and Aluminum Components from Waste TNT/RDX/Al Explosive by Density Classification Method

被引：0

作者：

Zhang S.-X. ^{[1
]}

Wang Y.-F. ^{[1
]}

Tong Y. ^{[1
]}

Huang F.-L. ^{[1
]}

机构：

[1] State Key Laboratory of Explosive Science and Technology, Beijing Institute of Technology, Beijing

来源：

Huozhayao Xuebao/Chinese Journal of Explosives and Propellants | 2020年 / 43卷 / 02期

关键词：

Applied chemistry; Density classification method; Purity; RDX; Recovery rate; Waste TNT/RDX/Al explosive;

D O I：

10.14077/j.issn.1007-7812.201907038

中图分类号：

学科分类号：

摘要：

In order to study the efficient and low-cost physical method of separating and recycling the components of TNT/RDX/Al explosive, the component of TNT was recovered by controlling-temperature centrifugation and controlling-temperature washing and recrystallization, and the RDX and aluminum powder were separated by density classification according to the different densities between RDX and aluminum powder. The separation conditions were optimized. The recovered materials were characterized by DSC and XRD, and their impact sensitivities were tested. The results show that the recovery rates of RDX and aluminum powder were 67.6% and 86.5%, with the purities of 77.2% and 94.6%, respectively under the condition of zinc bromide solution (density of 2.0g/cm3), reaction temperature 30℃ and centrifugal speed 2500r/min. The recovered RDX has good thermal stability, containing a small amount of aluminum powder and TNT-RDX eutectic, and basically there is no independent TNT, and its impact sensitivity is 90%. The recovered aluminum powder contains trace amounts of alumina powder and explosive components. There is no zinc bromide in either of the recovered components. This physical method adopted can effectively realize the efficient and green recovery of various components from waste TNT/RDX/Al explosive. © 2020, Editorial Board of Journal of Explosives & Propellants. All right reserved.

引用

页码：155 / 160

页数：5

共 11 条

[1]

Kang H., Hyejoo K., Lee C.H., Et al., Extraction-based recovery of RDX from obsolete Composition B, Journal of Industrial & Engineering Chemistry, 56, pp. 394-398, (2017)

[2]

Morris J.B., Separation of RDX from composition B via a supercritical fluid extraction process, 4, (1997)

[3]

Spencer A.F., Hartline D.F., Recovery of secondary explosive from explosive composition, (1999)

[4]

Ding Y.-K., Wu Y., Liu G.-Q., Et al., Separation of TNT from discarded or obsolete TNT/RDX/Al explosives by melting method, Chinese Journal of Energetic Materials, 22, 4, pp. 548-553, (2014)

[5]

Wang Y.-F., Zhang S.-X., Tong Y., Study on separation of TNT from waste or obsoleteTNT/RDX/Al explosive by melting centrifugal method, Transactions of Beijing Institute of Technology, 12, pp. 198-204, (2018)

[6]

Pilkington E.S., Warren L.J., Determination of heavy metal distribution in marine sediments, Environmental Science & Technology, 13, 3, pp. 295-299, (1979)

[7]

Ding Z.-Y., Study on distribution of heavy metals in soil by density classification method, Environmental Science & Technology, 4, pp. 7-11, (1984)

[8]

Yang Y., The impact on the physical components of paddy soil organic carbon with the application of organic material, (2014)

[9]

Olley J., Caitcheon G., Murray A., The distribution of apparent dose as determined by optically stimulated luminescence in small aliquots of fluvial quartz: implications for dating young sediments, Quaternary Science Reviews, 17, 11, pp. 1033-1040, (1998)

[10]

Bolch C.J.S., The use of sodium polytungstate for the separation and concentration of living dinoflagellate cysts from marine sediments, Phycologia, 36, 6, pp. 472-478, (1997)

← 1 2 →