Anti-seismic Design Method for Floor Electrical Equipment in Whole-indoor Substation

被引：0
作者：
Xie Q. [1 ,2 ]
Bian X. [1 ]
Xu J. [1 ]
机构：
[1] College of Civil Engineering, Tongji University, Shanghai
[2] Key Laboratory of Performance Evolution and Control for Engineering Structures, Ministry of Education, Tongji University, Shanghai
来源：
Gaodianya Jishu/High Voltage Engineering | 2020年 / 46卷 / 06期
基金：
中国国家自然科学基金;
关键词：
Amplification factor; Electrical equipment; Floor response spectrum; Seismic responses; Whole-indoor substation;
D O I：
10.13336/j.1003-6520.hve.20200615037
中图分类号：
学科分类号：
摘要：
Whole-indoor substation is a key node of power system. Its equipment arranged on the building floor is very important for the safety operation of substation under earthquake action. In this paper, finite element models of four substation buildings and their floor electrical equipment are established firstly. Dynamic characteristics and seismic response of the models under 100 ground motions are analyzed.The floor response spectrum is obtained from the responses using mathematical statistics and linear fitting. The results show that the mean vales of the peak acceleration amplification factor for the second floor and the roof of the integrative building structure is 1.35 and 2.47, respectively. When the ratio of the fundamental period of the floor electrical equipment to the integrative building structure is between 0.9 and 1.1, the amplification factor of the mean floor response spectrum reaches the peak 4.80. The design floor response spectrum is related to four factors, including the importance category, floor location, damping ratio, and the torsion effects of integrative building. It is suggested to adopt the floor response spectrum design method recommended in this paper for anti-seismic design of the floor electrical equipment in the whole-indoor substation. © 2020, High Voltage Engineering Editorial Department of CEPRI. All right reserved.
引用
收藏
页码：2155 / 2163
页数：8
相关论文
共 25 条
[1]  
XIE Qiang, State-of-the-art of seismic disaster research and emergency response of electric power system, Electric Power Construction, 29, 8, pp. 1-6, (2008)
[2]  
XIE Qiang, WEN Jiayi, PANG Zhun, Base isolation and its cost-effective analysis on large transformer-bushing system, High Voltage Engineering, 46, 3, pp. 890-897, (2020)
[3]  
IGUSA T, KIUREGHIAN A D., Generation of floor response spectra including oscillator-structure interaction, Earthquake Engineering and Structural Dynamics, 13, 5, pp. 661-676, (1985)
[4]  
SUARES L E, SINGH M P., Floor response spectra with structure-equipment interaction effects by a mode synthesis approach, Earthquake Engineering and Structural Dynamics, 15, 2, pp. 141-158, (1987)
[5]  
RAN M J, GALFORD J E, LIU Y W., A comparison of floor response spectra techniques, World Earthquake Engineering, 1, 1, pp. 60-64, (1985)
[6]  
SUAREZ L E, SINGH M P., Floor spectra with equipment-structure-equipment interaction effects, Journal of Engineering Mechanics, 115, 2, pp. 247-264, (1989)
[7]  
SAUDY A G, AZIZ T S., A modified CCFD approach for the seismic analysis of multiply supported MDOF secondary systems, Nuclear Engineering and Design, 133, 2, pp. 183-197, (1992)
[8]  
POLITOPOULOS I, FEAU C., Some aspects of floor spectra of 1DOF nonlinear primary structures, Earthquake Engineering & Structural Dynamics, 36, 8, pp. 975-993, (2007)
[9]  
JIANG W, LI B, XIE W C., Generate floor response spectra: part 1. direct spectra-to-spectra method, Nuclear Engineering and Design, 293, 11, pp. 525-546, (2015)
[10]  
SU Jingyu, FAN Shuirong, TAN Jian, Simplified methods to calculate floor response spectra, Building Science, 2, pp. 29-36, (1991)
123