Lightweight design and multi-objective optimization of steel assembled wheel

被引：0
作者：
Wang Y. [1 ,2 ]
Liu X. [1 ,2 ]
Chen J. [1 ,2 ]
Han Y. [1 ,2 ]
Meng H. [1 ,2 ]
Xiao N. [3 ]
机构：
[1] School of Mechanical and Aerospace Engineering, Jilin University, Changchun
[2] State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun
[3] Jilin Lixin Auto Parts Co. LTD, Changchun
来源：
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology | 2020年 / 52卷 / 07期
关键词：
Dissimilar steel assembled wheels; Kriging approximation model; Lightweight design; Multi-objective optimization; Parameterization model;
D O I：
10.11918/201909211
中图分类号：
学科分类号：
摘要：
A kind of dissimilar steel assembled wheel with B500CL as inner rim and Q345B as outer rim material is designed, and a multi-variable cyclic load fatigue endurance test method is used to predict the fatigue life of the wheel. Based on finite element method, the strength and stiffness of the wheel under different loads and the fatigue life and safety factor under different stress frequencies are calculated, and the key parts of local large stress are analyzed. A parameterized model is established in the turning condition, and 8 structural design variables are defined. The initial sample points are selected by using the optimal Latin hyper-square experimental design method and the Kriging approximate model of wheels is fitted. Taking the minimum mass, fatigue life and the maximum fatigue life safety coefficient of the wheel as the objective, and taking the stress and the maximum shape variables as the constraints, the multi-objective optimization of the wheel was carried out, and the bending fatigue test was conducted for verification. The results show that the dissimilar steel assembled wheels have good performance and meet the design life requirement after optimization. Compared with the wheel before optimization, the quality of dissimilar steel assembled wheels is reduced by 9.73%. © 2020, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.
引用
收藏
页码：170 / 178
页数：8
相关论文
共 22 条
  • [1] JIANG Rongchao, WANG Dengfeng, QIN Min, Et al., Lightweight design of torsional girder of car rear suspension based on fatigue life, Journal of Jilin University (Engineering Edition), 46, 1, (2016)
  • [2] LI Heng, SHAN Yingchun, LU Hongzhou, Et al., Fatigue simulation analysis of steel wheels and alternative design of niobium-containing high strength steel, Proceedings of the 2014 Annual Meeting of China Automotive Engineering Society, (2014)
  • [3] ZHANG Y, LAI X, ZHU P, Et al., Lightweight design of automobile component using high strength steel based on dent resistance, Materials & Design, 27, 1, (2006)
  • [4] HSU Y L, HSU M S., Weight reduction of aluminum disc wheels under fatigue constraints using a sequential neural network approximation method, Computers in Industry, 46, 2, (2001)
  • [5] SONG W, WOODS J L, DAVIS R T, Et al., Failure analysis and simulation evaluation of an Al 6061 alloy wheel hub, Journal of Failure Analysis and Prevention, 15, 4, (2015)
  • [6] AKBULUT H., On optimization of a car rim using finite element method, Finite Elements in Analysis & Design, 39, 5, (2003)
  • [7] BALLO F, MASTINU G, GOBBI M., Lightweight design of a racing motorcycle wheel, SAE World Congress & Exhibition, (2016)
  • [8] YAN Shengzan, Finite element analysis and experimental study of aluminum alloy wheel structure design, (2008)
  • [9] KOCABICAK U, FIRAT M., Numerical analysis of wheel cornering fatigue tests, Engineering Failure Analysis, 8, 4, (2001)
  • [10] ZHENG Z G, SUN T, XU X Y, Et al., Numerical simulation of steel wheel dynamic cornering fatigue test, Engineering Failure Analysis, 39, (2014)
123