Tribological Properties of Textured Ti2AlN

被引：0
|
作者：
Sakka Y. [1 ]
Musha S. [1 ]
Morita K. [1 ]
Kasahara A. [1 ]
Tosa M. [1 ]
Suzuki T.S. [1 ]
机构：
[1] National Institute for Materials Science, 2-1, Sengen-1, Tsukuba
来源：
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy | 2023年 / 70卷 / 10期
关键词：
MAX phase ceramics; textured ceramics; Ti[!sub]2[!/sub]AlN; wear;
D O I：
10.2497/jjspm.22-00059
中图分类号：
学科分类号：
摘要：
Wear properties of high-density Ti2AlN oriented specimens prepared by slip casting in a high magnetic field followed by SPS were investigated by comparing them with nonoriented specimens. The coefficients of friction were in the range of 0.25 < μ < 0.35 for both oriented and nonoriented specimens at each load, and even without lubrication, low coefficients of friction were observed. The specific wear of the oriented specimens was lower than that of the nonoriented specimens, and the specific wear increased with increasing load. The top surface of the oriented specimen showed less specific wear than the side surfaces, which was interpreted to be due to the layered structure of the plate-like grains. From the sliding marks, a large area of the nonoriented specimen was worn, whereas a large area of the oriented specimen maintained its initial surface condition. ©2023 Japan Society of Powder and Powder Metallurgy.
引用
收藏
页码：437 / 441
页数：4
相关论文
共 50 条
  • [21] Tribological properties of dimple-textured titanium alloys under dry sliding contact
    Wu, Ze
    Xing, Youqiang
    Huang, Peng
    Liu, Lei
    SURFACE & COATINGS TECHNOLOGY, 2017, 309 : 21 - 28
  • [22] Tribological properties of laser surface textured and plasma electrolytic oxidation duplex-treated Ti6Al4V alloy deposited with MoS2 film
    Qin, Yongkun
    Xiong, Dangsheng
    Li, Jianliang
    SURFACE & COATINGS TECHNOLOGY, 2015, 269 : 266 - 272
  • [23] Tribological Properties of Textured Cemented Carbide Surfaces of Different Wettability Produced by Pulse Laser
    Hao, Xiuqing
    Song, Xiaolu
    Li, Liang
    He, Ning
    PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 1, 2017,
  • [24] Investigation of the tribological properties of the different textured DLC coatings under reciprocating lubricated conditions
    Shum, P. W.
    Zhou, Z. F.
    Li, K. Y.
    TRIBOLOGY INTERNATIONAL, 2013, 65 : 259 - 264
  • [25] Effect of squamous textured SiC on the dry-sliding tribological properties of graphite asperities
    Zhang, Na
    Zhan, Xianghua
    Li, Zhentao
    Liu, Yancong
    Ma, Jian
    Gao, Jindong
    WEAR, 2024, 544
  • [26] The tribological properties of PPS-PTFE/SiO2 coating deposited on the textured surfaces processed by ultrasonic rolling
    Wu, Jiaxing
    Deng, Jianxin
    Zhang, Zhihui
    Bao, Yichen
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2024, 12 (03):
  • [27] Synthesis, characterization, and tribological properties of two-dimensional Ti3C2
    Yang, Jin
    Chen, Beibei
    Song, Haojie
    Tang, Hua
    Li, Changsheng
    CRYSTAL RESEARCH AND TECHNOLOGY, 2014, 49 (11) : 926 - 932
  • [28] Mechanical and tribological properties of TiB2-Ti composites prepared by spark plasma sintering
    Puchy, V
    Kovacik, J.
    Kovalcikova, A.
    Sedlak, R.
    Dzunda, R.
    Dusza, J.
    Falat, L.
    Podobova, M.
    Besterci, M.
    Hvizdos, P.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2019, 57 (06): : 435 - 442
  • [29] Tribological properties of Ti-implanted duralumin and stainless steel
    Youssef, AA
    Budzynski, P
    Filiks, J
    Kamienska, B
    Maczka, D
    VACUUM, 2002, 68 (02) : 131 - 137
  • [30] On design and tribological behaviour of laser textured surfaces
    Bhaduri, D.
    Batal, A.
    Dimov, S. S.
    Zhang, Z.
    Dong, H.
    Fallqvist, M.
    M'Saoubi, R.
    COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT, 2017, 60 : 20 - 25
12345