Design and human-robot interaction control of rehabilitation exoskeleton compliant hip joint

被引：0
|
作者：
Cong M. [1 ]
Ma H. [1 ]
Liu D. [1 ]
Zhang J. [1 ]
机构：
[1] School of Mechanical Engineering, Dalian University of Technology, Dalian
来源：
Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition) | 2020年 / 48卷 / 10期
关键词：
Compliant hip joint; Friction compensation; Human-robot interaction control; Rehabilitation exoskeleton; Series elastic actuators;
D O I：
10.13245/j.hust.201007
中图分类号：
学科分类号：
摘要：
To solve the problem that the auxiliary force cannot be adjusted in real-time with the parameters of the lower limbs of the human body during the rehabilitation treatment of hip joint motion,a human-robot interaction control method based on friction compensation and fuzzy impedance control was proposed.The design of the bionic mechanism was based on the biological basis of the human hip joint,and to avoid the influence of the impedance parameters of the human lower limb on the output of the compliant hip joint,the dynamic modeling of the human-robot system was carried out.Based on the EKF (extended Kalman filter),the internal friction of the motor was compensated to reduce the friction influence on the motor output position.An identification algorithm was used to estimate the impedance parameters of the human lower limbs,a closed-loop human-robot interaction controller was constructed based on fuzzy impedance control,and the contact force was adjusted in real-time to achieve gait trajectory training.The experiment verified the rationality of the design of the rehabilitation exoskeleton compliant hip joint and the effectiveness of the human-robot interaction controller method. © 2020, Editorial Board of Journal of Huazhong University of Science and Technology. All right reserved.
引用
收藏
页码：38 / 43
页数：5
相关论文
共 15 条
  • [1] 5
  • [2] FARKHATDINOV I, EBERT J, VAN OORT G, Et al., Assisting human balance in standing with a robotic exoskeleton[J], IEEE Robotics and Automation Letters, 4, 2, pp. 414-421, (2019)
  • [3] 45, 10, (2017)
  • [4] ZHANG T, TRAN M, HUANG H., Design and experimental verification of hip exoskeleton with balance capacities for walking assistance, IEEE/ASME Trans- actions on Mechatronics, 23, 1, pp. 274-285, (2018)
  • [5] CAPPELLO L, XILOYANNIS M, DINH B K, Et al., Multistable series elastic actuators:design and control [J], Robotics and Autonomous Systems, 118, pp. 167-178, (2019)
  • [6] ZHAO Y, PAINE N, JORGENSEN S J, Et al., Impedance control and performance measure of series elastic actuators, IEEE Transactions on Industrial Electronics, 65, 3, pp. 2817-2827, (2018)
  • [7] PRATT G A, WILLISSON P, BOLTON C, Et al., Late motor processing in low-impedance robots:impedance control of series-elastic actuators,2004, Proc of American Control Conference, pp. 3245-3251, (2004)
  • [8] VALLERY H, VENEMAN J, VAN ASSELDONK E, Et al., Compliant actuation of rehabilitation robots [J], IEEE Robotics & Automation Magazine, 15, 3, pp. 60-69, (2008)
  • [9] WYETH G., Demonstrating the safety and performance of a velocity sourced series elastic actuator:ICRA,2008, Proc of IEEE International Conference on Robotics and Automation, pp. 3642-3647, (2008)
  • [10] OH S, KONG K., High-precision robust force control of a series elastic actuator, IEEE/ASME Transactions on Mechatronics, 22, 1, pp. 71-80, (2017)
12