Human-machine collaborative control of forward shovel hydraulic mining excavators

被引：0

作者：

Dong B. ^{[1
]}

Qin T. ^{[1
]}

Yang X. ^{[1
]}

Li Y. ^{[1
]}

机构：

[1] School of Automation Science and Electrical Engineering, Beihang University, Beijing

来源：

Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2024年 / 50卷 / 06期

关键词：

auxiliary operation; human-machine collaboration; hydraulic excavator; kinematics; operation performance;

D O I：

10.13700/j.bh.1001-5965.2022.0517

中图分类号：

学科分类号：

摘要：

In view of the high operation complexity of forward shovel hydraulic mining excavators, a general human-machine collaborative control method was proposed. This paper compared the performance of three new working devices which could reduce the operation complexity of the forward shovel hydraulic excavators under the boom lifting and horizontal crowding operation modes. The results show that the innovative design of the working devices has the problems of complex mechanisms and low operation accuracy. The human-machine collaborative control method based on inverse kinematics and switching control adopts the strategy that the driver manually controls the main actuator, and other auxiliary actuators cooperate independently according to the constraints of operation requirements. This not only ensures the operation accuracy but also reduces the operation difficulty of drivers. The research results show that the proposed human-machine collaborative control method can reduce the operation complexity and improve the operation accuracy and efficiency of the forward shovel excavators under the boom lifting and horizontal crowding operation modes. The method has the advantages of flexible mode switching and strong universality. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.

引用

页码：1952 / 1959

页数：7

共 16 条

[1]

HALL A S, MCAREE P R., Robust bucket position tracking for a large hydraulic excavator, Mechanism and Machine Theory, 40, 1, pp. 1-16, (2005)

[2]

MITREV R, GRUYCHEV R, POBEGAILO P., CAD/CAE investigation of a large hydraulic mining excavator, Machine Design, 3, 1, pp. 17-22, (2011)

[3]

VLADEANU A, VLADEANU G., The possibilities of the horizontal trajectory realization of the bucket teeth at tri-power excavators, SISOM 2012 and Session of the Commission of Acoustics, pp. 232-239, (2012)

[4]

ZHU D D, CAO Y., Kinematics analysis of triangle structure face-shovel, Coal Mine Machinery, 36, 11, pp. 126-127, (2015)

[5]

DING H F, CAO Y, YANG Z Z, Et al., Position kinematics analysis of multi-linkage face-shovel excavator and envelope plotting using D-H method, Journal of Yanshan University, 38, 3, pp. 197-203, (2014)

[6]

LI Y H, MU X Y, FAN R J., Multi-objective optimization and simulation of novel working mechanism for face-shovel excavator, International Journal of Intelligent Robotics and Applications, 5, 1, pp. 1-9, (2021)

[7]

FAN R J, LI Y H., An adaptive fuzzy trajectory tracking control via improved cerebellar model articulation controller for electrohydraulic shovel, IEEE/ASME Transactions on Mechatronics, 26, 6, pp. 2870-2880, (2021)

[8]

QIN T, LI Y H, QUAN L, Et al., An adaptive robust impedance control considering energy-saving of hydraulic excavator boom and stick systems, IEEE/ASME Transactions on Mechatronics, 27, 4, pp. 1928-1936, (2022)

[9]

SHI J P, QUAN L, ZHANG X G, Et al., Electro-hydraulic velocity and position control based on independent metering valve control in mobile construction equipment, Automation in Construction, 94, pp. 73-84, (2018)

[10]

BAO R K, WANG Q F, WANG T., Energy-saving trajectory tracking control of a multi-pump multi-actuator hydraulic system, IEEE Access, 8, pp. 179156-179166, (2020)

← 1 2 →