Large-scale field creep tests on moraine soil

被引：0
|
作者：
Guo X. [1 ]
Wang Z. [1 ]
机构：
[1] Chongqing Branch, Changjiang River Scientific Research Institute, Chongqing
来源：
Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering | 2023年 / 45卷
关键词：
creep test; long-term strength; moraine soil;
D O I：
10.11779/CJGE2023S10031
中图分类号：
学科分类号：
摘要：
The sediment of the Kangding Bank of Xingkkang Bridge of Sichuan-Tibet Expressway is mostly consisted of very thick moraine soil. In order to study the creep characteristics of the moraine soil, the large-scale field creep tests in meters are carried out using the self-developed electric-gas-liquid servo joint control geotechnical mechanics test devices, and the load servo control and the data automatically collected in the whole process are successfully achieved. The peak strength parameters and long-term strength parameters of the moraine soil are obtained by conducting the conventional direct shear tests and shear creep tests in the field. The creep deformation laws and the revelant creep model for settlement deformation under each load are obtained by analyzing the results of the field compression creep test. The study shows that the duration of transient creep is less than 5 min. In addition, the transient creep is characterized by the delayed deformation after loading, and the creep rate fluctuantly decreases in the decelerating creep stage. In addition, the creep rate exhibits a raising curve with fluctuation in the steady creep stage, which indicates the deformation-adjusting effects of soil skeleton particles. © 2023 Chinese Society of Civil Engineering. All rights reserved.
引用
收藏
页码：144 / 147
页数：3
相关论文
共 10 条
  • [1] YUAN Guangxiang, SHANG Yanjun, LIN Daming, Engineering geological properties and stability analysis of moraine debris slopes in palong river drainage area along sichuan-tibet highway, Journal of Engineering Geology, 17, 2, pp. 188-194, (2009)
  • [2] FANG Xuedong, HUANG Runqiu, Physical and mechanical properties of typical moraine soil on the qinghai-tibet plateau, Journal of Engineering Geology, 21, 1, pp. 123-128, (2013)
  • [3] LU Shizhan, WANG Ren, HU Mingjian, Et al., Current status, problems and future trends of the research on engineering properties of moraine soil, Journal of Engineering Geology, 19, pp. 298-303, (2011)
  • [4] QU Zhijiong, LIU Kaiming, XIAO Xiaojun, Et al., Study of microstructure, stress-strain behavior and constitutive model of till, Chinese Journal of Geotechnical Engineering, 14, 6, pp. 19-28, (1992)
  • [5] ZHANG Yongshuang, QU Yongxin, WANG Xianli, Et al., On the engineering geological classification of quaternary glacial deposits in southwestern mountain area of China, Journal of Engineering Geology, 17, 5, pp. 581-589, (2009)
  • [6] INSLEY A E., Triaxial shear characteristics of compacted glacial till under unusually high confining pressures, International Conference Soil Mechanics& Foundation Engineering, (1965)
  • [7] SPRINGMAN S M, JOMMI C, TEYSSEIRE P., Instabilities on moraine slopes induced by loss of suction: a case history, Géotechnique, 53, 1, pp. 3-10, (2003)
  • [8] HUGHES D B, CLARKE B G, MONEY M S., The glacial succession in lowland Northern England, Quarterly Journal of Engineering Geology, 31, 3, pp. 211-234, (1998)
  • [9] FENG Junde, LI Jianguo, WANG Ren, Et al., Large scale direct shear test on strength behavior of railway moraine soils in Yunnan, Rock and Soil Mechanics, 29, 12, pp. 3205-3210, (2008)
  • [10] XU Dingping, WANG Bin, JIANG Longjian, Et al., Study of methods of triaxial numerical simulation test of glacial till, Rock and Soil Mechanics, 29, 12, pp. 3466-3470, (2008)
1