Pilot protection based on boundary characteristics of CLC tuned half-wavelength transmission line

被引:0
|
作者
Shu H. [1 ]
Tang Y. [1 ,2 ]
Zhang Y. [1 ]
Han Y. [1 ]
Dai Y. [1 ]
Bo Z. [1 ]
机构
[1] State Key Laboratory of Collaborative Innovation Center for Smart Grid Fault Detection, Protection and Control Jointly, Kunming University of Science and Technology, Kunming
[2] Faculty of Resources Engineering, Kunming University of Science and Technology, Kunming
基金
中国国家自然科学基金;
关键词
boundary characteristics; directional elements; half-wavelength transmission; pilot protection; tuned circuit;
D O I
10.16081/j.epae.202210004
中图分类号
学科分类号
摘要
When the fault occurs inside the line,the fault current collected at the line-side measuring point at the connection between the tuned circuit and the transmission line is rich in high-frequency components. When the external fault occurs,the high-frequency components collected from the line-side is in scarcity,this boundary characteristic is used to construct a directional element for half-wavelength transmission line. For the tuned circuit,the simulated current waveform is matched with the measured waveform using its faultless model,and if the match is successful,there is no fault inside the tuned circuit,otherwise,there is a fault inside the tuned circuit. The combination of the directional element and the tuned circuit protection constitutes its pilot protection scheme without the need of double-end data synchronization. A large number of RTDS real-time digital-analog hybrid tests show that the pilot protection scheme is effective over the full line length range and is not affected by current transformer saturation,and has good robustness. © 2023 Electric Power Automation Equipment Press. All rights reserved.
引用
收藏
页码:1 / 9
页数:8
相关论文
共 22 条
  • [1] Dong YANG, LIU Yutian, Preliminary discussion on China transmission backbone in the future[J], Electric Power Automation Equipment, 30, 8, pp. 1-5, (2010)
  • [2] Technical and economic comparison between direct current and half-wavelength transmission systems for very long distances [J], IET Generation,Transmission & Distribution, 11, 11, pp. 2871-2878, (2017)
  • [3] XU Huibo, Analyzing characteristics of half-wavelength transmission system with tuning network[D], (2017)
  • [4] JIAO Chongqing, QI Lei,CUI Xiang, Compensation technology for electrical length of half-wavelength AC power transmission lines[J], Power System Technology, 35, 9, pp. 17-21, (2011)
  • [5] Pulin CAO, Hongchun SHU, Bo YANG, Et al., Analysis of electrical length compensation types for tuned half-wavelength transmission lines[J], International Journal of Electrical Power & Energy Systems, 115, (2020)
  • [6] CUI Xiang, Chained number of lumped-circuits for physical analogy of the lossless transmission lines[J], Proceedings of the CSEE, 37, 9, pp. 2561-2571, (2017)
  • [7] Xiang CUI, Notes on lumped-circuits for physical analogy of transmission lines[J], Proceedings of the CSEE, 38, 1, pp. 1-11, (2018)
  • [8] DU Dingxiang, WANG Xingguo, LIU Huanzhang, Et al., Fault characteristics of half-wavelength AC transmission line and its impaction to transmission line protection[J], Proceedings of the CSEE, 36, 24, pp. 6788-6795, (2016)
  • [9] ZHENG Yuping, SI Xinyao, WU Tonghua, Et al., Travelling wave protection for UHV half-wavelength AC transmission lines[J], Automation of Electric Power Systems, 44, 18, pp. 124-131, (2020)
  • [10] CHEN Le, Studies on new principles and new criteria of high performance main protection applied to UHVAC long transmission lines[D], (2018)