Controller parameter self-tuning when control loop mode switching for multi-loop PID control system of chemical process

被引:0
作者
Wang J. [1 ]
Xu F. [1 ]
Luo X. [1 ]
机构
[1] Department of Automation, China University of Petroleum, Beijing
来源
Huagong Xuebao/CIESC Journal | 2022年 / 73卷 / 04期
关键词
Multi-loop control; Multi-variable system; Nyquist array design method; PID; Process control; Self-tuning;
D O I
10.11949/0438-1157.20211473
中图分类号
学科分类号
摘要
Chemical process is generally a multivariable system, but its main control scheme is decentralized multi-loop PID conventional control. Since there are different degrees of coupling in the multivariable system, there are mutual influences between the control loops. When the other control loops switch between the manual/automatic modes, the equivalent controlled object of this loop will mutate so that the original control parameters of this loop will be inappropriate and the control performance will become worse even the closed-loop system is unstable. In order to avoid this situation, the stability of the control loop mode switching should be studied from the perspective of the whole system, so the multivariable frequency domain Nyquist array design method is adopted. Based on the Nyquist stability criterion under diagonal dominance, the stability changing of each control loop before and after mode switching is quantitatively analyzed from the Gershgorin circle boundary points, so as to determine the adjustment direction and size of the controller gain for each loop. The controller parameter self-tuning of each loop at the moment of control loop mode switching is realized to compensate the disturbance caused by the control loop mode switching and ensure the closed-loop stability of the whole system. The multi-loop PID control system of Shell heavy oil fractionator is used as an example, when the three PID control loops are put into use in turn, the control parameter self-tuning according to the boundary points of Gershgorin circle makes the closed-loop system still maintain certain control performance, otherwise the closed-loop system will be unstable. © 2022, Editorial Board of CIESC Journal. All right reserved.
引用
收藏
页码:1647 / 1657
页数:10
相关论文
共 36 条
[21]  
Rosenbrock H H., Design of multivariable control systems using the inverse Nyquist array, Proceedings of the Institution of Electrical Engineers, 116, 11, pp. 1929-1936, (1969)
[22]  
Rosenbrock H H, Owens D H., Computer aided control system design, IEEE Transactions on Systems, Man, and Cybernetics, 6, 11, (1976)
[23]  
Rosenbrock H H., Progress in the design of multivariable control systems, Measurement and Control, 4, 1, pp. 9-11, (1971)
[24]  
McMorran P D., Extension of the inverse Nyquist method, Electronics Letters, 6, 25, pp. 800-801, (1970)
[25]  
McMorran P D., Design of gas-turbine controller using inverse Nyquist method, Proceedings of the Institution of Electrical Engineers, 117, 10, (1970)
[26]  
Ho W K, Lee T H, Xu W, Et al., The direct Nyquist array design of PID controllers, IEEE Transactions on Industrial Electronics, 47, 1, pp. 175-185, (2000)
[27]  
Chen D, Seborg D E., Design of decentralized PI control systems based on Nyquist stability analysis, Journal of Process Control, 13, 1, pp. 27-39, (2003)
[28]  
Chen D, Seborg D E., Multiloop PI/PID controller design based on Gershgorin bands, IEE Proceedings-Control Theory and Applications, 149, 1, pp. 68-73, (2002)
[29]  
Luyben W L., Simple method for tuning SISO controllers in multivariable systems, Industrial & Engineering Chemistry Process Design and Development, 25, 3, pp. 654-660, (1986)
[30]  
Ho W K, Lee T H, Gan O P., Tuning of multiloop proportional-integral-derivative controllers based on gain and phase margin specifications, Industrial & Engineering Chemistry Research, 36, 6, pp. 2231-2238, (1997)