Periodic motion transition characteristics of a vibro-impact system with multiple impact constraints

被引:0
作者
Wang S.-J. [1 ,2 ]
Luo G.-W. [2 ]
机构
[1] School of Mechatronic Engineering, Lanzhou Jiaotong University, Lanzhou
[2] Key Laboratory of System Dynamics and Reliability of Rail Transport Equipment of Gansu Province, Lanzhou
来源
Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition) | 2024年 / 54卷 / 04期
关键词
bifurcation; co-simulation; compound constraints; hysteresis region group; mechanical design; vibro-impact;
D O I
10.13229/j.cnki.jdxbgxb.20221637
中图分类号
学科分类号
摘要
A type of two-degree-of-freedom forced vibro-impact system with rigid and elastic compound constraints was studied. Based on the numerical calculation method of two-parameter co-simulation,the mode types and existence regions of the periodic motions of the system were obtained on the parameter plane composed of the key parameters excitation force frequency and the gap value between two masses. The transition laws between impactless motion and adjacent fundamental period motion and between adjacent fundamental period motions were revealed. The effect of the change of the elastic constraint stiffness on the types of mode and the region of existence of the periodic motions of the system was analyzed. The results show that there are two main types of transition regions,including tongue-like regions and hysteresis regions,between impactless motion and adjacent fundamental period motion and between adjacent fundamental periodic motions. There are regular subharmonic motions in the tongue-like regions. These subharmonic motions and the adjacent fundamental period motions form a hysteresis region group near the boundary lines of the tongue-like regions. Increasing the stiffness value at the elastic constraint will significantly increase the existence regions of quasi-periodic motions and chaotic motions in the low frequency domain in the two-parameter plane,and divide the existence regions of periodic motions. © 2024 Editorial Board of Jilin University. All rights reserved.
引用
收藏
页码:902 / 916
页数:14
相关论文
共 22 条
[11]  
Ing J, Pavlovskaia E, Wiercigroch M, Et al., Bifurcation analysis of an impact oscillator with a one-sided elastic constraint near grazing, Physica D: Nonlinear Phenomena, 239, 6, pp. 312-321, (2010)
[12]  
Liao M L, Ing J, Chavez J P, Et al., Bifurcation techniques for stiffness identification of an impact oscillator [J], Communications in Nonlinear Science and Numerical Simulation, 41, pp. 19-31, (2016)
[13]  
Jiang H B, Antonio S E C, Yoshisuke U, Et al., Grazing-induced bifurcations in impact oscillators with elastic and rigid constraints[J], International Journal of Mechanical Sciences, 127, pp. 204-214, (2017)
[14]  
Liu P F, Zhu L Y, Gou X F, Et al., Neighboring periodic motion in spur gear pair and its identification methods, Nonlinear Dynamics, 106, pp. 2991-3023, (2021)
[15]  
Gou Xiang-feng, Zhu Ling-yun, Chen Dai-lin, Et al., Analysis of effect of parameters coupling on the dynamic characteristics of a single degree-of-freedom spur gear system, Journal of Vibration Engineering, 30, 2, pp. 202-213, (2017)
[16]  
Gou X F, Zhu L Y, Chen D L., Bifurcation and chaos analysis of spur gear pair in two-parameter plane, Nonlinear Dynamics, 79, 3, pp. 2225-2235, (2015)
[17]  
Zhang Y X, Xie X P, Luo G W., Multiple nested basin boundaries in nonlinear driven oscillators, Communications in Nonlinear Science and Numerical Simulation, 44, pp. 220-228, (2017)
[18]  
Saunders B E, Vasconcellos R, Kuether R J, Et al., Characterization and interaction of geometric and contact/impact nonlinearities in dynamical systems, Mechanical Systems and Signal Processing, 167, A, (2022)
[19]  
Czolczynski K, Blazejczyk-Okolewska B, Okolewski A., Analytical and numerical investigations of stable periodic solutions of the impacting oscillator with a moving base, International Journal of Mechanical Sciences, 115, 116, pp. 325-338, (2016)
[20]  
Li G F, Wu S P, Wang H B, Et al., Global behavior of a simplified model for the micro-vibration molding machine in parameter-state space[J], Mechanism and Machine Theory, 154, (2020)