EXPERIMENTAL STUDY ON NUCLEATE POOL-BOILING HEAT TRANSFER OF R141B OVER PLAIN AND MICRO-FINNED CYLINDRICAL SURFACES AT DIFFERENT PRESSURES

被引：1

作者：

Shah B.A. ^{[1
]}

Shah K. ^{[1
]}

Lakhera V.J. ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Institute of Technology, Nirma University, Gujarat, Ahmedabad

来源：

Multiphase Science and Technology | 2022年 / 34卷 / 01期

关键词：

Bubble departure diameter; Heat transfer; Micro-finned cylindrical surface; Pool boiling; Refrigerant;

D O I：

10.1615/MultScienTechn.2022039270

中图分类号：

学科分类号：

摘要：

Micro-finned cylindrical surfaces find wide applications as enhanced surfaces for heat transfer in heat exchangers used in refrigeration and chemical process industries. In the present study, the experimental investigation of pool-boiling heat transfer of refrigerant R141b has been carried out at different pressures (between 100 and 175 kPa) and heat flux that ranges from 20 to 100 kW/m2 over a plain and micro-finned cylindrical surface. It was observed that with the micro-finned cylindrical surface, boiling performance was improved for all tested pressures. The average increase in the boiling heat-transfer coefficient is 7-35% in comparison to the plain surface at respective pressure between 100 and 175 kPa. With the rise in pressure, the boiling heat-transfer coefficient for the micro-finned cylindrical surface increases at a higher rate as compared to the plain surface. This is due to the combined effect of the enhanced surface and decrease in surface tension of the liquid with pressure. The bubble departure diameter decreases with an increase in pressure, as with increased pressure the surface tension decreases, thereby causing an early detachment of the bubble from the surface. The experimental values of bubble departure diameter were compared with the well-known correlations and were found to be within ± 20%. © 2022 Begell House Inc.. All rights reserved.

引用

页码：67 / 94

页数：27

共 58 条

[1]

Abdollahi A., Salimpour M.R., Etesami N., Experimental Analysis of Magnetic Field Effect on the Pool Boiling Heat Transfer of a Ferrofluid, Appl. Therm. Eng, 111, pp. 1101-1110, (2017)

[2]

Alavi Fazel S.A., Shafaee S.B., Bubble Dynamics for Nucleate Pool Boiling of Electrolyte Solutions, J. Heat Transf, 132, 8, pp. 1-7, (2010)

[3]

Bergles A.E., High-Flux Processes through Enhanced Heat Transfer, 5th Intl. Conf. on Boiling Heat Transfer (ICBHT), pp. 1-13, (2003)

[4]

Bovard S., Asadinia H., Hosseini G., Alavi Fazel S.A., Investigation and Experimental Analysis of the Bubble Departure Diameter in Pure Liquids on Horizontal Cylindrical Heater, Heat Mass Transf, 53, 4, pp. 1199-1210, (2017)

[5]

Chen H., Chen G., Zou X., Yao Y., Gong M., Experimental Investigations on Bubble Departure Diameter and Frequency of Methane Saturated Nucleate Pool Boiling at Four Different Pressures, Int. J. Heat Mass Transf, 112, pp. 662-675, (2017)

[6]

Chen T., An Experimental Investigation of Nucleate Boiling Heat Transfer from an Enhanced Cylindrical Surface, Appl. Therm. Eng, 59, pp. 355-361, (2013)

[7]

Chen Y., Groll M., Mertz R., Kulenovic R., Pool Boiling Heat Transfer of Propane, Isobutane and Their Mixtures on Enhanced Tubes with Reentrant Channels, Int. J. Heat Mass Transf, 48, 11, pp. 2310-2322, (2005)

[8]

Chien L.H., andWebb R.L., A Parametric Study of Nucleate Boiling on Structured Surfaces, Part I: Effect of Tunnel Dimensions, J. Heat Transf, 120, 4, pp. 1042-1048, (1998)

[9]

Chien L.H., andWebb R.L., A Parametric Study of Nucleate Boiling on Structured Surfaces, Part II: Effect of Pore Diameter and Pore Pitch, J. Heat Transf, 120, 4, pp. 1049-1054, (1998)

[10]

Chien L.H., Webb R.L., Measurement of Bubble Dynamics on an Enhanced Boiling Surface, Exp. Therm. Fluid Sci, 16, 3, pp. 177-186, (2020)

← 1 2 3 4 5 6 →