Evaluation of the Performance of Platinum Plated Titanium Porous Transport Layer for PEM Water Electrolysis

被引：0

作者：

Minoura, Ayumu ^{[1
]}

Kumagai, Masanobu ^{[1
]}

Yashiro, Hitoshi ^{[2
]}

Ota, Hiroki ^{[1
]}

机构：

[1] JFE Techno-Research Co., Ltd, Japan

[2] Faculty of Science and Engineering, Iwate University, Japan

来源：

Zairyo to Kankyo/ Corrosion Engineering | 2024年 / 73卷 / 03期

关键词：

Platinum;

D O I：

10.11263/jcorr.73.61

中图分类号：

学科分类号：

摘要：

The performance of titanium(Ti)fibers with different platinum(Pt)plating thicknesses as the anode side porous transport layer (PTL)for proton exchange membrane water electrolysis (PEMWE)has been evaluated. Their mechanical strength in the thickness direction was about twice better than the carbon paper. Single-cell performance based on i-V measurements showed that Pt plating on Ti fibers contributed to the improvement of cell performance with the best i-V performance at a Pt plating thickness of 0.5μm. This is due not only to the reduction in contact resistance with the effect of the Pt plating, but also to the reduction in charge transfer resistance due to the high oxygen evolution reaction activity of Pt. © 2024 Japan Society of Corrosion Engineering. All rights reserved.

引用

页码：61 / 65

共 50 条

[41] Effect of the IrOx Conductivity on the Anode Electrode/Porous Transport Layer Interfacial Resistance in PEM Water Electrolyzers
Bernt, M.
Schramm, C.
Schroeter, J.
Gebauer, C.
Byrknes, J.
Eickes, C.
Gasteiger, H. A.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2021, 168 (08)
[42] MICROPOROUS LAYER - A CHALLENGE OR DEAD END RESEARCH DIRECTION IN A PEM WATER ELECTROLYSIS?
Bouzek, K.
Polonsky, J.
Kodym, R.
Bystron, T.
PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON CHEMICAL TECHNOLOGY, 1ST EDITION, 2016, : 166 - 170
[43] Electrochemical performance analysis of a PEM water electrolysis with cathode feed mode based on flow passage shape of titanium plates
Tugirumubano, Alexandre
Shin, Hee-Jae
Go, Sun-Ho
Lee, Min-Sang
Kwac, Lee Ku
Kim, Hong-Gun
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2016, 17 (08) : 1073 - 1078
[44] Electrochemical performance analysis of a PEM water electrolysis with cathode feed mode based on flow passage shape of titanium plates
Alexandre Tugirumubano
Hee-Jae Shin
Sun-Ho Go
Min-Sang Lee
Lee Ku Kwac
Hong-Gun Kim
International Journal of Precision Engineering and Manufacturing, 2016, 17 : 1073 - 1078
[45] Evaluating the performance of hybrid proton exchange membrane for PEM water electrolysis
Abdel-Motagali, Ali
Al Bacha, Serge
Rouby, Waleed M. A. El
Bigarre, Janick
Millet, Pierre
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 49 : 87 - 102
[46] Studies on testing and evaluation of platinum plated titanium electrode for production of uranous nitrate
Salunke, S. U.
Singh, Kulwant
Bidaye, A. C.
Goswami, J. L.
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY, 2012, 294 (01) : 49 - 52
[47] Studies on testing and evaluation of platinum plated titanium electrode for production of uranous nitrate
S. U. Salunke
Kulwant Singh
A. C. Bidaye
J. L. Goswami
Journal of Radioanalytical and Nuclear Chemistry, 2012, 294 : 49 - 52
[48] Development of an experimentally validated semi-empirical fully-coupled performance model of a PEM electrolysis cell with a 3-D structured porous transport layer
Ojong, Emile Tabu
Kwan, Jason Tai Hong
Nouri-Khorasani, Amin
Bonakdarpour, Arman
Wilkinson, David P.
Smolinka, Toni
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (41) : 25831 - 25847
[49] Performance of the gold-plated titanium bipolar plates for the light weight PEM fuel cells
Wang, Szu-Hua
Peng, Jinchyau
Lui, Wai-Bun
Zhang, Jin-Sheng
JOURNAL OF POWER SOURCES, 2006, 162 (01) : 486 - 491
[50] Enhancement of mass transport behavior by controlling the surface structure of the porous transport layer for polymer electrolyte membrane water electrolysis
Lee, Han Eol
Nguyen, Ta Nam
Doan, Tuan Linh
Jung, Yoonseong
Kim, Taekeun
APPLIED THERMAL ENGINEERING, 2025, 270

← 1 2 3 4 5 →