Evaluation of the Performance of Platinum Plated Titanium Porous Transport Layer for PEM Water Electrolysis

被引：0

作者：

Minoura, Ayumu ^{[1
]}

Kumagai, Masanobu ^{[1
]}

Yashiro, Hitoshi ^{[2
]}

Ota, Hiroki ^{[1
]}

机构：

[1] JFE Techno-Research Co., Ltd, Japan

[2] Faculty of Science and Engineering, Iwate University, Japan

来源：

Zairyo to Kankyo/ Corrosion Engineering | 2024年 / 73卷 / 03期

关键词：

Platinum;

D O I：

10.11263/jcorr.73.61

中图分类号：

学科分类号：

摘要：

The performance of titanium(Ti)fibers with different platinum(Pt)plating thicknesses as the anode side porous transport layer (PTL)for proton exchange membrane water electrolysis (PEMWE)has been evaluated. Their mechanical strength in the thickness direction was about twice better than the carbon paper. Single-cell performance based on i-V measurements showed that Pt plating on Ti fibers contributed to the improvement of cell performance with the best i-V performance at a Pt plating thickness of 0.5μm. This is due not only to the reduction in contact resistance with the effect of the Pt plating, but also to the reduction in charge transfer resistance due to the high oxygen evolution reaction activity of Pt. © 2024 Japan Society of Corrosion Engineering. All rights reserved.

引用

页码：61 / 65

共 50 条

[1] Influence of IrO2/TiO2 coated titanium porous transport layer on the performance of PEM water electrolysis
Doan, Tuan Linh
Lee, Han Eol
Kim, MinJoong
Cho, Won Chul
Cho, Hyun Seok
Kim, Taekeun
JOURNAL OF POWER SOURCES, 2022, 533
[2] Model of oxygen bubbles and performance impact in the porous transport layer of PEM water electrolysis cells
Nouri-Khorasani, Amin
Ojong, Emile Tabu
Smolinka, Tom
Wilkinson, David P.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (08) : 28665 - 28680
[3] Impact of porous transport layer compression on hydrogen permeation in PEM water electrolysis
Staehler, Markus
Staehler, Andrea
Scheepers, Fabian
Carmo, Marcelo
Lehnert, Werner
Stolten, Detlef
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2020, 45 (07) : 4008 - 4014
[4] Titanium porous-transport layers for PEM water electrolysis prepared by tape casting
Lee, Jason K.
Lau, Grace Y.
Sabharwal, Mayank
Weber, Adam Z.
Peng, Xiong
Tucker, Michael C.
JOURNAL OF POWER SOURCES, 2023, 559
[5] Improving mass transfer with surface patterning of the porous transport layer for PEM water electrolysis
Yang, Yang
Tao, Ouyang
Tao, Dachen
Xu, Boshi
Li, Jun
Huang, Jian
Zhang, Liang
Ye, Dingding
Chen, Rong
Zhu, Xun
Liao, Qiang
CELL REPORTS PHYSICAL SCIENCE, 2025, 6 (02):
[6] On the influence of the anodic porous transport layer on PEM electrolysis performance at high current densities
Lickert, Thomas
Kiermaier, Maximilian L.
Bromberger, Kolja
Ghinaiya, Jagdishkumar
Metz, Sebastian
Fallisch, Arne
Smolinka, Tom
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2020, 45 (11) : 6047 - 6058
[7] Porous transport layer influence on overpotentials in PEM water electrolysis at low anode catalyst loadings
Hasa, Bjorn
Aryal, Utsav Raj
Higashi, Shougo
Tolouei, Nadia Ebrahimpour
Lang, Jack T.
Erb, Bryan
Smeltz, Andrew
V. Zenyuk, Iryna
Zhu, Gaohua
APPLIED CATALYSIS B-ENVIRONMENT AND ENERGY, 2025, 361
[8] Modeling Overpotentials Related to Mass Transport Through Porous Transport Layers of PEM Water Electrolysis Cells
Schmidt, Gergely
Suermann, Michel
Bensmann, Boris
Hanke-Rauschenbach, Richard
Neuweiler, Insa
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2020, 167 (11)
[9] Introducing titanium hydride on porous transport layer for more energy efficient water electrolysis with proton exchange membrane
Bautkinova, Tereza
Utsch, Nikolai
Bystron, Tomas
Lhotka, Miloslav
Kohoutkova, Martina
Shviro, Meital
Bouzek, Karel
JOURNAL OF POWER SOURCES, 2023, 565
[10] Analysis of mass transport processes in the anodic porous transport layer in PEM water electrolysers
Zinser, Alexander
Papakonstantinou, Georgios
Sundmacher, Kai
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (52) : 28077 - 28087

← 1 2 3 4 5 →