Study on bending behavior of circular UHPC filled high strength steel tube beams

被引：0
作者：
Wei J.-G. [1 ,2 ]
Luo X. [1 ]
Chen B.-C. [1 ]
Lü J.-Y. [1 ]
机构：
[1] Key Laboratory on Multi-Disasters Prevention and Mitigation in Civil Engineering, Fuzhou University, Fuzhou
[2] Department of Civil Engineering, Fujian University of Technology
来源：
Gongcheng Lixue/Engineering Mechanics | 2021年 / 38卷 / 01期
关键词：
Bending bearing capacity; Composite beam; High strength steel; Hoop coefficient; UHPC;
D O I：
10.6052/j.issn.1000-4750.2020.03.0158
中图分类号：
学科分类号：
摘要：
Taking the steel content and hoop coefficient as test parameters, the pure bending tests of 5 circular ultra-high performance concrete (UHPC) filled high strength steel tube (UFHST) beams and 2 circular UHPC filled normal strength steel tube (UFST) beams were carried out to investigate their bending behaviors. The experimental results show that UFHST beams failed in ductile. The composite section satisfied the assumption of plane cross-section. The hoop action of the high strength steel tube on UHPC should be considered in the compression zone. Compared with the normal strength steel tube, high strength steel tube can restrain the transverse expansion of UHPC more effectively. The finite element model verified by test results was used to conduct parameter analysis of the hoop coefficient. When the concrete-filled steel tube beam reaches its bending bearing capacity, the corresponding neutral axis and the stresses of steel and concrete are related to the hoop coefficient. With the increase of the hoop coefficient, the neutral axis keeps moving toward the section centerline; there is a decrease in the steel stress in the tensile zone, and an increase in the steel stress and concrete stress in the compressive zone. It was inaccurate and discrete to use Chinese code GB50936−2014 for predicting the bending bearing capacity of UFHST beams. Consequently, a new calculation method was proposed. Copyright ©2021 Engineering Mechanics. All rights reserved.
引用
收藏
页码：183 / 194
页数：11
相关论文
共 29 条
  • [1] Han L H, Li W, Bjorhovde R., Developments and advanced applications of concrete-filled steel tubular (CFST) structures: members, Journal of Constructional Steel Research, 100, pp. 211-228, (2014)
  • [2] Chen Baochun, Mou Tingmin, Chen Yiyan, Et al., State-of-the-art research and engineering application of steel-concrete composite bridges in China, Journal of Building Structures, 34, pp. 1-10, (2013)
  • [3] Cho J H, Moon J K, Hee J., Flexural strength evaluation of concrete-filled steel tube (CFST) composite girder, Journal of Constructional Steel Research, 151, pp. 12-24, (2018)
  • [4] Ke Xiaojun, Su Yisheng, Shang Xiaoyu, Et al., Strength calculation and eccentric compressive test of steel tube-reinforced concrete composite columns, Engineering Mechanics, 35, 12, pp. 134-142, (2018)
  • [5] Xu Lihua, Xu Mingyao, Zhou Penghua, Et al., Experimental study on self-stressing self-compacting and high-strength concrete filled steel tubular columns under eccentric compression, Engineering Mechanics, 34, 7, pp. 166-176, (2017)
  • [6] Abed F, Alhamaydeh M, Abdalla S., Experimental and numerical investigations of the compressive behavior of concrete filled steel tubes (CFSTs), Journal of Constructional Steel Research, 80, pp. 429-439, (2013)
  • [7] Ding Faxin, Yu Zhiwu, Pure bending properties of self-compacting concrete filled circular steel Tube, Journal of Traffic and Transportation Engineering, 6, 1, pp. 63-79, (2006)
  • [8] Ji Bohai, Hu Zhengqing, Chen Jiashu, Et al., An experimental study on the behavior of lightweight aggregate concrete filled circular steel tubes under pure bending load, China Civil Engineering Journal, 40, 8, pp. 35-40, (2007)
  • [9] Chen Baochun, Ji Tao, Huang Qingwei, Et al., Review of research on ultra-high strength concrete, Journal of Architectural and Civil Engineering, 100, 3, pp. 211-228, (2014)
  • [10] Shi G, Hu F X, Shi Y J., Recent research advances of high strength steel structures and codification of design specification in china, International Journal of Steel Structures, 14, 4, pp. 873-887, (2014)
123