Analysis on Moisture Absorption and Discharge Characteristics of External Wall with Internal Wetting Control Mortar and Its Influence on Load

被引：0
作者：
Gong G. [1 ]
Wang H. [1 ]
Liu Y. [1 ]
Shi X. [1 ]
机构：
[1] College of Civil Engineering, Hunan University, Changsha
来源：
Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences | 2024年 / 51卷 / 01期
关键词：
building materials; external wall; humidity control; load of envelope structure; moisture absorption and dischargs characteristics;
D O I：
10.16339/j.cnki.hdxbzkb.2024021
中图分类号：
学科分类号：
摘要：
Based on the energy conservation of building envelope，this paper takes an internal plastering WSE （Wood fibre、Sepiolite and Expanded perlite）composite moisture control and thermal insulation mortar exterior wall as a research subject and compares it with an ordinary mortar exterior wall for the analysis of moisture absorption and desorption as well as its impact on energy load. Using a thermal and moisture coupling model of building materials from the COMSOL Multiphysics finite element software，this paper analyzes humidity transferring change between ambiance humidity change and exterior walls，as well as the heat transferring mechanism of exterior walls. For the WSE wall，total heat loads and the rate of latent heat loads to total heat loads are investigated in Changsha represented as a typical area with hot summer and cold winter. Besides，the annual energy consumption of the WSE wall is compared and analyzed in Beijing for cold areas and Guangzhou for hot summer and warm winter areas . It was found that velocities of moisture absorption and desorption of the WSE wall outperformed those of the ordinary mortar exterior wall for a long time. Moreover，the WSE wall can conserve annual energy consumption by 22.31% to 23.85% compared with the ordinary mortar exterior. Temperature rise is consistent with the moisture absorption velocity in the process of moisture absorption of walls，which reflects that moisture transfer has a great impact on temperature on the inner surface of walls. The impact is enhanced with the augment of moisture transfer. For the process of moisture desorption of the wall，cooling velocity is faster for the higher moisture desorption velocity. In conclusion，the WSE wall possesses a superior performance on moisture transfer and energy conservation，and it is conducive to the development of the building envelope in energy conservation. © 2024 Hunan University. All rights reserved.
引用
收藏
页码：225 / 236
页数：11
相关论文
共 23 条
  • [1] ZHENG X, YUAN L T．, Recent progress on composite humidity control materials［J］, Chemical Industry and Engineering Progress, 39, 4, pp. 1378-1388, (2020)
  • [2] GAN C P，, CHEN W, YUE Z X, Study on properties of new indoor thermal insulation and humidity control mortar ［J］ ．Interior Architecture of China, 1, pp. 77-79, (2022)
  • [3] ZHU S, ，MA X Y，YANG Y X，et al，Experimental study on humidity controlling and mechanical properties of humidity controlling concrete based on zeolite［J］, Building Structure, 51, Sup.1, pp. 1332-1337, (2021)
  • [4] WU Y., Study on properties and evaluation methods of humidity control materials［D］, (2016)
  • [5] GONG G C，, WU Y, Research on the hygroscopicity of a composite hygroscopic material and its influence on indoor thermal and humidity environment［J］, Applied Sciences, 8, 3, (2018)
  • [6] FICK A., Ueber diffusion［J］, Annalen Der Physik, 170, 1, pp. 59-86, (1855)
  • [7] LUIKOV A V．, Heat and mass transfer in capillary-porous bodies ［J］, Advances in Heat Transfer, 1, 1, pp. 123-184, (1964)
  • [8] Modelling of moisture and thermal transient behaviour of multi-layer non-cavity walls ［J］．Building and Environment, 34, 5, pp. 537-551, (1999)
  • [9] Numerical investigation for thermal performance of exterior walls of residential buildings with moisture transfer in hot summer and cold winter zone of China［J］, Energy and Buildings, 93, pp. 259-268, (2015)
  • [10] HOU S D, LIU F S, WANG S J, Coupled heat and moisture transfer in hollow concrete block wall filled with compressed straw bricks［J］, Energy and Buildings, 135, pp. 74-84, (2017)
123