Freeze-thaw stabilization of fused deposition modeling 3D-printed SABIC structures

被引：0
作者：
Elmushyakhi A. [1 ]
机构：
[1] Department of Mechanical Engineering, College of Engineering, Northern Border University, Arar
来源：
Journal of King Saud University - Engineering Sciences | 2022年 / 34卷 / 02期
关键词：
3D printing; Additive manufacturing; Freeze-thaw; Fused deposition modeling; SABIC ULTEM 9085;
D O I：
10.1016/j.jksues.2020.09.002
中图分类号：
学科分类号：
摘要：
Fused deposition modeling (FDM) is a widely applied rapid prototyping technology that produces layered models from specially designed thermoplastic filaments. Thermoplastic materials can be layered using several parameters that influence the mechanical properties of the printed object. In this study, the effects of freeze–thaw cycles on the physical characteristics of FDM objects printed using the ULTEM 9085 filament is assessed. The samples used in this study were printed with an air gap of –0.025 mm and at raster angles of 0°, 45°, and 90°. The results indicate that freeze–thaw conditioning reduces the tensile properties of FDM samples. Results also can help enhance FDM material properties to withstand significant temperature changes whilst having a prolonged service life. © 2020 King Saud University
引用
收藏
页码：116 / 125
页数：9
相关论文
共 53 条
[1]  
Anitha R., Arunachalam S., Radhakrishnan P., Critical parameters influencing the quality of prototypes in fused deposition modelling, J. Mater. Process. Technol., 118, 1-3, pp. 385-388, (2001)
[2]  
Ahn S.H., Montero M., Odell D., Roundy S., Wright P.K., (2002)
[3]  
Arivazhagan A., Masood S., Sbarski I., pp. 950-955, (2011)
[4]  
ASTM A., (2014)
[5]  
(2019)
[6]  
Al-Ghamdi K.A., Sustainable FDM additive manufacturing of ABS components with emphasis on energy minimized and time efficient lightweight construction, Int. J. Lightweight Mater. Manuf., 2, 4, pp. 338-345, (2019)
[7]  
Bagsik A., Schoppner V., Klemp E., pp. 629-640, (2012)
[8]  
Bazli M., Ashrafi H., Oskouei A.V., Effect of harsh environments on mechanical properties of GFRP pultruded profiles, Compos. B Eng., 99, pp. 203-215, (2016)
[9]  
Boschetto A., Bottini L., Veniali F., Finishing of Fused Deposition Modeling parts by CNC machining, Rob. Comput. Integr. Manuf., 41, pp. 92-101, (2016)
[10]  
Bazli M., Ashrafi H., Jafari A., Zhao X.L., Raman R.K., Bai Y., Effect of fibers configuration and thickness on tensile behavior of GFRP laminates exposed to harsh environment, Polymers, 11, 9, (2019)
123456