Study on debonding failure model of polyurea-based coating with high velocity water flow based on cohesive zone model

被引：0

作者：

Li B. ^{[1
]}

Zhang Z. ^{[1
]}

Li B. ^{[1
]}

Liu X. ^{[1
]}

Yang X. ^{[3
]}

机构：

[1] China State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin, China Institute of Water Resources and Hydropower Research, Beijing

[2] State Grid Hebei Fengning Pumped Storage Co., Ltd, Chengde

[3] Henan Branch of the Construction and Administration Bureau of South-to-North Water BFZDF Diversion Middle Route Project, Zhengzhou

来源：

Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics | 2020年 / 52卷 / 05期

关键词：

Cohesive zone model; Debonding damage; High-velocity water flow; Impact resistance;

D O I：

10.6052/0459-1879-20-064

中图分类号：

学科分类号：

摘要：

The surface of the flood discharge building is usually sprayed with polyurea-based coating to improve the impact resistance. However, the research on the debonding failure mechanism of the anti-wear polyurea-based coating under the action of high-speed water flow velocity is still blank. Based on the flow pattern of high-velocity water flow, the mechanical model of high-velocity water flow to flood-discharge building was determined, and the load on flood discharge building caused by high-velocity water flow mainly includes drag force, impact force, fluctuating force and lifting force. The cohesive zone model was used to characterize the debonding failure process of the interface between polyurea-based coating and flood-reducing building, and the debonding failure model of polyurea-coating with high-speed water flow was established, and the finite element formal equations, constitutive relationship, damage initiation principle, evolution principle and contact and collision model of the model are given. The relationship between stress-displacement in the process of debonding failure was obtained by the debonding failure tests, and the variation law between peeling failure stress and inclination angle of interface was obtained. According to the peeling failure test, the parameters of debonding failure model were obtained, and the model was also verified. The test results were in good agreement with the model calculation results, which provides a theoretical basis for the anti-shock and wear-resistant design of flood discharge building. © 2020, Chinese Journal of Theoretical and Applied Mechanics Press. All right reserved.

引用

页码：1538 / 1546

页数：8

共 36 条

[1]

Lin Jiyong, Wang Guanglun, Hydraulic Structure, (2009)

[2]

Zhao Chaoyun, Operation and Maintenance of Hydraulic Structure, (2009)

[3]

Xu Xiaowei, Fan Zengbai, Application of anti-erosion and anti-wear concrete in xiangjiaba hydropower station, Water Resources and Hydropower Engineering, 46, S1, pp. 67-70, (2015)

[4]

Xin Yuliang, Shi Kebin, Nuerkaili Yiziteluofu, Et al., Study on the abrasion resistant properties of high performance concrete with steel slag powder, Advances in Science and Technology of Water Resources, 34, 6, pp. 40-44, (2014)

[5]

Chen Liang, Wang Zaiqin, Feng Jing, Et al., Anti-abrasion Material for Water Conservancy and Hydropower Engineering and Its Application, (2017)

[6]

Urgessa GS, Esfandiari M., Review of polymer coatings used for blast strengthening of reinforced concrete and masonry structures, International Congress on Polymers in Concrete, pp. 713-719, (2018)

[7]

Buchan PA, Chen JF., Blast resistance of FRP composites and polymer strengthened concrete and masonry structures, Composites: Part B, 38, pp. 509-522, (2007)

[8]

Buckley ML, Wei Y, Jaffe BE, Et al., Inverse modeling of velocities and inferred cause of overwash that emplaced inland fields of boulders at anegada, british virgin islands, Natural Hazards, 63, 1, pp. 133-149, (2012)

[9]

Schuttrumpf H., Oumeraci H., Layer thicknesses and velocities of wave overtopping flow at seadikes, Coastal Engineering, 52, 6, pp. 473-495, (2005)

[10]

Bomers A, Lopez JPA, Warmink JJ, Et al., Modelling effects of an asphalt road at a dike crest on dike cover erosion onset during wave overtopping, Natural Hazards Journal of the International Society for the Prevention & Mitigation of Natural Hazards, 93, 1, pp. 1-30, (2018)

← 1 2 3 4 →