Replacement and pumping technology for coal seams with low gas content and high intensity mining

被引：0

作者：

Song X. ^{[1
,2
]}

Shu L. ^{[1
,2
]}

Wang B. ^{[1
,2
]}

Fan Y. ^{[1
,2
]}

Gong H. ^{[3
]}

Cui C. ^{[1
,2
]}

An F. ^{[4
]}

机构：

[1] China Coal Research Institute, Beijing

[2] State Key Lab of Coal Resources High Efficient Mining and Clean Utilization, China Coal Research Institute, Beijing

[3] School of Emergency Management and Safety Engineering, China University of Mining and Technology-Beijing, Beijing

[4] Shanxi Jinxing Energy Co Ltd, Shanxi, Lyuliang

来源：

Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering | 2023年 / 40卷 / 04期

关键词：

gas injection; high yield and efficiency; low gas deposits; upper corner;

D O I：

10.13545/j.cnki.jmse.2022.0673

中图分类号：

学科分类号：

摘要：

For the effect of conventional gas extraction and coal seam modification technology is poor for the high intensity gas emission in high yield and efficiency mines in low gas coal seams, the technology of gas injection and displacement is proposed, and the field test and application are carried out based on the study of the occurrence characteristics and flow mechanism of coal seam gas. The results show that: under the condition of conventional extraction of low gas coal seams, the pure gas extraction is low, the flow attenuation is fast, and the effect of gas extraction can be improved efficiently after the implementation of gas injection; continuous gas injection is more effective than intermittent displacement; the effect of gas extraction is improved by increasing the gas injection pressure and effective influence range of the injection spacing; within the range of test conditions, actual gas production can be increased by 367. 5% to 487. 6% in comparison to the conventional extraction prediction; the gas injection can achieve the rapid reduction of coal seam gas content and ensure the gas concentration in the upper corner maintain at a low level, the monthly average reduction of coal seam gas in the application section is 0.402 ~ 0.565 m3/t, and the maximum gas concentration in the upper corner is 0.31% . © 2023 China University of Mining and Technology. All rights reserved.

引用

页码：847 / 856

页数：9

共 24 条

[11]

FAN Y P, SHU L Y, HUO Z G, Et al., Numerical simulation of sectional hydraulic reaming for methane extraction from coal seams, Journal of Natural Gas Science and Engineering, 95, (2021)

[12]

WANG Guofa, New technological progress of coal mine intelligence and its problem, Coal Science and Technology, 50, 1, pp. 1-27, (2022)

[13]

ZHANG Qinghua, YAO Yahu, ZHAO Jiyu, Status of mine ventilation technology in China and prospects for intelligent development, Coal Science and Technology, 48, 2, pp. 97-103, (2020)

[14]

CHENG Xiaozhi, WANG Kai, HAO Haiqing, Et al., Research on intelligent regulation and control system and key technology of mine local ventilation, Industry and Mine Automation, 47, 9, pp. 18-24, (2021)

[15]

ZHAO Pengxiang, KANG Xinpeng, LI Shugang, Et al., Optimization of “hole-drift” collaborative drainage layout parameters and high efficient drainage in pressure relief gas migration area, Coal Science and Technology, 50, 2, pp. 137-146, (2022)

[16]

XIAO Junfeng, FAN Shixing, LU Ping, Et al., Layout parameter optimization of highly-located drainage roadway along seam for controlling gas with pressure relief from close-distance methane-rich seam group, Journal of Mining & Safety Engineering, 33, 3, pp. 564-570, (2016)

[17]

LI Shugang, LIU Lidong, ZHAO Pengxiang, Et al., Analysis and application of fracture evolution law of overburden compacted area on fully-mechanized mining face under multiple factors, Coal Science and Technology, 50, 1, pp. 95-104, (2022)

[18]

GUO Mingjie, GUO Wenbing, YUAN Ruifu, Et al., Spatial location determination of directional boreholes based on regional distribution characteristics of mining-induced overburden fractures, Journal of Mining & Safety Engineering, 39, 4, pp. 817-826, (2022)

[19]

DING Yang, YI Yan, LIN Haifei, Et al., Spatial distribution law of gas concentration in the fully mechanized caving face of high intensity mining, Journal of Mining & Safety Engineering, 39, 1, pp. 206-214, (2022)

[20]

(2010)

← 1 2 3 →