Analytical calculation of stray capacitance of motor end in bearing current problem of induction motor driven by frequency convertor

被引:0
作者
Jia L. [1 ]
Liu R.-F. [1 ]
Wang Q.-Q. [1 ]
机构
[1] School of Electrical Engineering, Beijing Jiaotong University, Beijing
来源
Dianji yu Kongzhi Xuebao/Electric Machines and Control | 2022年 / 26卷 / 08期
关键词
analytic calculation; bearing current; bearing voltage; end capacitance; squirrel cage induction motor; stray capacitance;
D O I
10.15938/j.emc.2022.08.004
中图分类号
学科分类号
摘要
The bearing current generated by the variable frequency drive system causes electric corrosion damage of bearings. To analyze and predict the bearing current, it is necessary to accurately extract the value of stray capacitances of the motor. For the analytical calculation has the advantages of fast speed and clear relationship, it is suitable to deal with similar calculation in motor design to obtain the scheme of shaft voltage suppression. The existing analytical calculation cannot accurately obtain the end capacitance, which is critical in the capacitance calculation. In this paper, the motor end is reasonably simplified. The end area was divided into different subdomains, and the capacitance of each subdomain was calculated respectively. The analytical calculation model of motor end capacitance was established. The analytical calculation results of each sub-domain of the end capacitance were compared with the finite element simulation results of the motor end, and finally the whole and measured results were compared. The results show that this method can calculate the end capacitance accurately. © 2022 Editorial Department of Electric Machines and Control. All rights reserved.
引用
收藏
页码:30 / 39
页数:9
相关论文
共 16 条
[11]  
VOSTROV K, PYRHONEN J, AHOLA J., Shielding the end windings to reduce bearing currents, 2012 15th International Conference on Electrical Machines and Systems (ICEMS), pp. 1431-1437, (2020)
[12]  
ADABI J, ZARE F, GHOSH A., End-winding effect on shaft voltage in AC generators, 2009 13th European Conference on Power Electronics and Applications, pp. 1-10, (2009)
[13]  
AHOLA J, MUETZE A, NIEMELA M., Normalization-based approach to electric motor BVR related capacitances computation [J], IEEE Transactions on Industry Applications, 55, 3, pp. 2770-2780, (2019)
[14]  
ZHENG Minwei, Non-parallel-plate capacitor for further calculation of electric field and capacitance, College Physics, 29, 12, (2010)
[15]  
ZHAO Linming, LIU Ying, LIU Bo, Et al., Calculation of the capacitance for a non-parallel plate capacitor, College Physics, 33, 7, (2014)
[16]  
WAN Buyong, ZHANG Xiaosong, FENG Qing, Edge-effect in capacitance of non-parallel plate capacitor, College Physics, 31, 7, (2012)