Experimental Analysis of Double Pipe Heat Exchanger with V-cut Twisted Tape Inserts using PCM Dispersed Nanofluids

被引：0

作者：

Singh S.K. ^{[1
]}

Kumar A. ^{[2
]}

Singh P. ^{[3
]}

Ansu A.K. ^{[3
]}

机构：

[1] Dept. of Mech. Engg., Tezpur University, Assam

[2] Dept. of Mech. Engg, NIT Durgapur

[3] Dept. of Mech. Engg, Manipal University Jaipur, Rajasthan

来源：

International Journal of Vehicle Structures and Systems | 2022年 / 14卷 / 02期

关键词：

Entropy generation; Friction factor; Nanofluid; Nusselt number; Phase change material; V-cuts twisted tape;

D O I：

10.4273/IJVSS.14.2.09

中图分类号：

学科分类号：

摘要：

The performance of a double tube heat exchanger with V-cut twisted tape inserts (VCTT) and phase change material (PCM) dispersed nanofluid is investigated experimentally. The three water-based Al2O3, PCM, and Al2O3+PCM nanofluid with different concentrations (0.01-0.1% vol.) are used. The impacts of different geometric parameters, i.e., twist ratio (TR), depth ratio (DR) and width ratio (WR) of VCTT inserts on Nusselt number (Nu), friction factor (f) and entropy generation are examined. The outcomes expose that Nu and f increase as particle concentration increases and twisting ratio decreases. A higher Nu and f are generated by a higher DR or a lower WR. In all cases, the entropy generation of nanofluid is found to be lower than that of water. For all working fluids, a rise in TR, a fall in DR, and a rise in WR increases overall entropy generation. © 2022. MechAero Foundation for Technical Research & Education Excellence.

引用

页码：179 / 184

页数：5

共 50 条

[41] Theoretical and experimental studies of heat transfer in a double-pipe heat exchanger equipped with twisted tape and nanofluid
Reza Aghayari
Heydar Maddah
Seyed Mohsen Pourkiaei
Mohammad Hossein Ahmadi
Lingen Chen
Mahyar Ghazvini
The European Physical Journal Plus, 135
[42] Performance assessment in a heat exchanger tube fitted with double counter twisted tape inserts
Bhuiya, M. M. K.
Sayem, A. S. M.
Islam, M.
Chowdhury, M. S. U.
Shahabuddin, M.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2014, 50 : 25 - 33
[43] Numerical investigation of turbulent CuO–water nanofluid inside heat exchanger enhanced with double V-cut twisted tapes
M. E. Nakhchi
J. A. Esfahani
Journal of Thermal Analysis and Calorimetry, 2021, 145 : 2535 - 2545
[44] Numerical analysis of thermo hydro-dynamics behavior of solar flat plate collector with square and V-cut twisted tape inserts
Narendran, Gnanesan
Jadhav, Prakash H.
Gnanasekaran, N.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2023,
[45] Numerical study on heat transfer enhancement and flow characteristics of double pipe heat exchanger fitted with rectangular cut twisted tape
Ali Barzegar
Dovood Jalali Vahid
Heat and Mass Transfer, 2019, 55 : 3455 - 3472
[46] Numerical study on heat transfer enhancement and flow characteristics of double pipe heat exchanger fitted with rectangular cut twisted tape
Barzegar, Ali
Jalali Vahid, Dovood
HEAT AND MASS TRANSFER, 2019, 55 (12) : 3455 - 3472
[47] Experimental heat transfer and pressure drop study on typical, perforated, V-cut and U-cut twisted tapes in a helically corrugated heat exchanger
Hasanpour, A.
Farhadi, M.
Sedighi, K.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2016, 71 : 126 - 136
[48] Numerical Analysis of Heat Transfer Characteristics with Triangular Cut Twisted Tape Inserts
Sivakumar, K.
Mohankumar, T.
Rajan, K.
INTERNATIONAL CONFERENCE ON SUSTAINABLE ENGINEERING AND TECHNOLOGY (ICONSET 2018), 2018, 2039
[49] Experimental investigations on heat transfer enhancement in a double pipe heat exchanger using hybrid nanofluids
Somanchi N.S.
Gugulothu R.
Tejeswar S.V.
Energy Harvesting and Systems, 2024, 11 (01)
[50] W-cut twisted tape's effect on the thermal performance of a double pipe heat exchanger: A numerical study
Dandoutiya, Bhrant Kumar
Kumar, Arvind
CASE STUDIES IN THERMAL ENGINEERING, 2022, 34

← 1 2 3 4 5 →