Adaptive optimization control method for overexposure of industrial camera

被引：1

作者：

Wu W. ^{[1
]}

Liao X. ^{[1
,2
]}

Li J. ^{[1
]}

Zhou J. ^{[1
]}

Zhuang J. ^{[2
]}

机构：

[1] School of Manufacturing Science and Engineering, Key Laboratory of Testing Technology for Manufacturing Process, Minsitry of Education, Southwest University of Science and Technology, Mianyang

[2] School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an

来源：

Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2023年 / 31卷 / 02期

关键词：

adaptive exposure; computer vision; parameter optimization;

D O I：

10.37188/OPE.20233102.0226

中图分类号：

学科分类号：

摘要：

Industrial cameras cannot clearly observe targets in real time in overexposed lighting conditions with sudden changes in brightness. An adaptive exposure control method is proposed to address this problem. First，the weighted average gray value of an image of a preset reference area is calculated，and then，the exposure value is calculated for the image. Next，a parameter control optimization method based on an improved S" curve is designed to optimize and adjust the internal parameters. Finally，the optimal level of clarity is obtained with reference to the preset position. Experimental results show that the proposed method takes approximately 0. 08 s to complete the entire camera adjustment process. Compared with those of the automatic exposure algorithm implemented on the camera hardware and an adaptive exposure algorithm based on image histogram features under the same conditions，the average standard deviation of the Laplacian of the images produced by the proposed algorithm is 54. 3% and 20. 6% greater，respectively. Therefore，the proposed algorithm can effectively enhance the adaptability of the optimized cameras under conditions of sudden changes in brightness and can be implemented in various practical applications. © 2023 Chinese Academy of Sciences. All rights reserved."

引用

页码：226 / 233

页数：7

共 18 条

[11]

SOMASUNDAR REDDY C，, BALAJI K., A fuzzy-PID controller in shell and tube heat exchanger simulation modeled for temperature control［J］, Indonesian Journal of Electrical Engineering and Computer Science, 21, 3, (2021)

[12]

MA Y, MU H Y，, Et al., Liquid cooling strategy of power battery based on fuzzy PID algorithm［J］, Control Theory & Applications, 38, 5, pp. 549-560, (2021)

[13]

LIU ZH, ZHOU ZH Q，, Et al., Adaptive optics correction technique based on fuzzy control［J］, Acta Physica Sinica, 65, 1, pp. 139-146, (2016)

[14]

WANG H F, JU Y F，, Et al., Illumination optimization for vision measurement based on No-reference image quality assessment［J］, Journal of Beijing University of Technology, 38, 12, pp. 1875-1879, (2012)

[15]

FAN C E, YAN J，, Et al., No-reference image quality assessment using joint color space statistical and texture feature［J］, Opt. Precision Eng, 26, 4, pp. 916-926, (2018)

[16]

CHEN J, LIN L, Et al., A review on No-reference quality assessment for blurred image ［J］, Acta Automatica Sinica, 48, 3, pp. 689-711, (2022)

[17]

BAI B D, LI J P., Multi-exposure image fusion based on attention mechanism［J］, Acta Photonica Sinica, 51, 4, pp. 344-355, (2022)

[18]

MA Z L, YU Y, Et al., Auto exposure control for high frame rate camera using image histogram feature function［J］, Opt，Precision Eng, 25, 4, pp. 494-503, (2017)

← 1 2 →