Adaptive optimization control method for overexposure of industrial camera

被引：1

作者：

Wu W. ^{[1
]}

Liao X. ^{[1
,2
]}

Li J. ^{[1
]}

Zhou J. ^{[1
]}

Zhuang J. ^{[2
]}

机构：

[1] School of Manufacturing Science and Engineering, Key Laboratory of Testing Technology for Manufacturing Process, Minsitry of Education, Southwest University of Science and Technology, Mianyang

[2] School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an

来源：

Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2023年 / 31卷 / 02期

关键词：

adaptive exposure; computer vision; parameter optimization;

D O I：

10.37188/OPE.20233102.0226

中图分类号：

学科分类号：

摘要：

Industrial cameras cannot clearly observe targets in real time in overexposed lighting conditions with sudden changes in brightness. An adaptive exposure control method is proposed to address this problem. First，the weighted average gray value of an image of a preset reference area is calculated，and then，the exposure value is calculated for the image. Next，a parameter control optimization method based on an improved S" curve is designed to optimize and adjust the internal parameters. Finally，the optimal level of clarity is obtained with reference to the preset position. Experimental results show that the proposed method takes approximately 0. 08 s to complete the entire camera adjustment process. Compared with those of the automatic exposure algorithm implemented on the camera hardware and an adaptive exposure algorithm based on image histogram features under the same conditions，the average standard deviation of the Laplacian of the images produced by the proposed algorithm is 54. 3% and 20. 6% greater，respectively. Therefore，the proposed algorithm can effectively enhance the adaptability of the optimized cameras under conditions of sudden changes in brightness and can be implemented in various practical applications. © 2023 Chinese Academy of Sciences. All rights reserved."

引用

页码：226 / 233

页数：7

共 18 条

[1]

SUN L N, WANG ZH H，, Et al., Review on key common technologies for intelligent applications of industrial robots［J］, Journal of Vibration，Measurement & Diagnosis, 41, 2, pp. 211-219, (2021)

[2]

BANI HASSAN N，, GHASSEMLOOY Z，, Et al., Data rate enhancement in optical camera communications using an artificial neural network equaliser［J］, IEEE Access, 8, pp. 42656-42665, (2020)

[3]

ZHOU J B, Et al., Real-time stripe width computation using back propagation neural network for adaptive control of line structured light sensors［J］, Sensors （Basel，Switzerland）, 20, 9, (2020)

[4]

LI W T, WANG P J, TANG X M., Accurate and rapid contour extraction of visual measurement for rail wear［J］, Opt. Precision Eng, 26, 1, pp. 238-244, (2018)

[5]

WANG J H, LU R SH, LIU D M., Adaptive fringe projection measurement method for high dynamic range surface［J］, Acta Optica Sinica, 41, 19, pp. 145-154, (2021)

[6]

HAMAMOTO T., Paper］adaptive exposure-time control based on image entropy for multiple-exposure-time image sensor ［J］, ITE Transactions on Media Technology and Applications, 9, 2, pp. 128-135, (2021)

[7]

QUE Y, YANG Y, LEE H J., Exposure measurement and fusion via adaptive multiscale edge-preserving smoothing［J］, IEEE Transactions on Instrumentation and Measurement, 68, 12, pp. 4663-4674, (2019)

[8]

WANG W C, YUAN X H, Et al., An experiment-based review of low-light image enhancement methods［J］, IEEE Access, 8, pp. 87884-87917, (2020)

[9]

BI X L, QIU Y M，, XIAO B，, Et al., Histogram equalization detection based on statistical features in digital image［J］, Chinese Journal of Computers, 44, 2, pp. 292-303, (2021)

[10]

MA T B, GONG H, DU F, Et al., Piezoelectric flexible manipulator vibration control based on line structured light and optimized PID［J］, Opt. Precision Eng, 29, 11, pp. 2661-2671, (2021)

← 1 2 →