Switch current measurement of SiC device based on twisted-pair four-layer PCB Rogowski coil

被引：0
|
作者：
Xu Z. [1 ]
Ming L. [1 ]
Shi Y.-F. [1 ]
Xin Z. [1 ]
Loh P.C. [2 ]
机构：
[1] State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin
[2] Power Conversion Lab., Department of Electronic Engineering, The Chinese University of Hong Kong, Hong Kong
来源：
Dianji yu Kongzhi Xuebao/Electric Machines and Control | 2021年 / 25卷 / 12期
关键词：
Printed circuit board; Rogowski coil; Silicon carbide device; Stealth return wire; Switch current measurement; Twisted-pair structure;
D O I：
10.15938/j.emc.2021.12.006
中图分类号：
学科分类号：
摘要：
To solve the problem of electromagnetic interference affecting the measurement accuracy of switching current measurement of silicon carbide (SiC) devices, a twisted-pair four-layer printed circuit board (PCB) Rogowski coil with strong immunity and high bandwidth is proposed. Firstly, based on the physical and electrical characteristics of SiC devices, the requirements of current sensors for switching current measurement were analyzed, which has higher bandwidth, stronger immunity, and lower intrusion in the measurement process. Secondly, the anti-interference principle of PCB Rogowski coil was analyzed, and the mechanism of the return wire and screen against magnetic and electric field interference was expounded. Then, the disturbance resistance of three typical PCB Rogowski coils (two-layer, four-layer and six-layer PCB Rogowski coils) was analyzed. Based on this, a twisted-pair PCB Rogowski coil was proposed. The scheme adopted a four-layer PCB design. The middle two layers were twisted-pair structure, while the outer two layers were grounded shielding. Simulation and experimental results show that the proposed scheme has strong disturbance immunity and high bandwidth characteristics, which is suitable for measuring the switch current of SiC devices. © 2021, Harbin University of Science and Technology Publication. All right reserved.
引用
收藏
页码：46 / 57
页数：11
相关论文
共 22 条
  • [1] QIAN Zhaoming, ZHANG Junming, SHENG Kuang, Status and development of power semiconductor devices and its applications, Proceedings of the CSEE, 34, 29, (2014)
  • [2] LIU Binli, XIAO Fei, LUO Yifei, Et al., Investigation into the health condition monitoring method of IGBT based on collector leakage current, Transactions of China Electrotechnical Society, 32, 16, (2017)
  • [3] (2019)
  • [4] ZHU Chunyu, YAN Weizhong, LIU Yongge, Method for monitoring bonding wire state of SiC MOSFET module based on U<sub>sS</sub>, Power Electronics, 54, 10, (2020)
  • [5] NEW C, LEMMON A N, SHAHABI A., Comparison of methods for current measurement in WBG systems, 2017 IEEE 5th Workshop on Wide Band-gap Power Devices and Applications (WiPDA), pp. 87-92, (2017)
  • [6] LIANG M, LI Y, ZHENG T Q., Research on precise test method for switching performance of high speed SiC MOSFET, 2016 Asian Conference on Energy, Power and Transportation Electrification (ACEPT), pp. 1-6, (2016)
  • [7] LIU Bin, SUN Yongshun, DING Yinjie, Et al., Low-power and high-sensitivity system-on-chip hall effect sensor, 2017 IEEE Sensors, pp. 1-3, (2017)
  • [8] LIAO Yong, LI Pengwei, LIN Hao, Et al., Hall sensor PMSM rotor position estimation method with variable parameter N-PI PLL, Electric Machines and Control, 24, 11, (2020)
  • [9] VLAICU C, OANCEA C D., The study of possibility to use the current transformer for power conversion, 2016 International Conference and Exposition on Electrical and Power Engineering, pp. 805-808, (2016)
  • [10] ZHANG Weichao, LAI Yongbao, ZHAO Hong, Et al., Structural optimization and temperature characteristic analysis of GMM-FBG fiber current sensor, Electric Machines and Control, 23, 6, (2019)
123