Effect of unsteady wake on full coverage film cooling effectiveness for a turbine blade

被引：0
作者：
Chen D. [1 ]
Zhu H. [1 ]
Li H. [1 ]
Liu H. [1 ]
Zhou D. [1 ]
机构：
[1] School of Power and Energy, Northwestern Polytechnical University, Xi'an
来源：
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2019年 / 40卷 / 03期
关键词：
Film cooling effectiveness; Mass flux ratio; PSP technique; Strouhal number; Turbine blade; Wakes;
D O I：
10.7527/S1000-6893.2018.22651
中图分类号：
学科分类号：
摘要：
The effect of unsteady wake on the film cooling effectiveness of the turbine blade is studied using the Pressure Sensitive Paint (PSP) measurement technique. The test blade has eleven rows of cylindrical film holes. The distribution of the film cooling effectiveness on the whole blade surface under different mass flux ratios and different wake Strouhal numbers (Sr=0, 0.12, 0.36) are obtained. The results show that as the wake Strouhal number increases, the radial averaged film cooling effectiveness of the leading edge decreases by up to 36.5%, the radial averaged film cooling effectiveness of the suction surface decreases by up to 53.5%, and that of the pressure surface decreases by up to 24.2%. The effect of wake on the leading edge and the suction surface is greater than that on the pressure surface. As the mass flux ratio increases, the effect of the unsteady wake decreases. When designing the cooling structure of the turbine blade, ignoring the effect of the wake increases the design risk. © 2019, Press of Chinese Journal of Aeronautics. All right reserved.
引用
收藏
相关论文
共 21 条
  • [1] Fernandes C.P., Voet M.T., Little Z., Et al., Flow statistics and visualisation of multi-row film cooling boundary layers: GT2017-64391, (2017)
  • [2] Zhu H.R., Xu D.C., Liu S.L., Et al., Film cooling experimental investigation of a row of dust-pan shaped holes, Acta Aeronautica et Astronautica Sinica, 18, 5, pp. 25-28, (1997)
  • [3] Han Z.X., Mo Y.J., Liu S., Experimental research on film cooling effectivenesses at different blowing ratios, Acta Aeronautica et Astronautica Sinica, 25, 6, pp. 551-555, (2004)
  • [4] Li G.C., Zhang W., Peng D.W., Et al., Numerical simulation of film cooling effectiveness with conical expanded branch holes, Acta Aeronautica et Astronautica Sinica, 31, 7, pp. 1360-1365, (2010)
  • [5] You L.P., Tao Y.J., Cai J., Et al., Experiment of composite cooling on leading edge of turbine blade, Acta Aeronautica et Astronautica Sinica, 30, 9, pp. 1618-1623, (2009)
  • [6] Wiese C.J., Rutledge J.L., Polanka M.D., Experimental evaluation of thermal and mass transfer techniques to measure adiabatic effectiveness with various coolant to freestream property ratios: GT2017-65019, (2017)
  • [7] Mcclintic J.W., Anderson J.B., Bogard D.G., Et al., Effect of internal crossflow velocity on film cooling effectiveness-Part I: Axial shaped holes: GT2017-64616, (2017)
  • [8] Mcclintic J.W., Anderson J.B., Bogard D.G., Et al., Effect of internal crossflow velocity on film cooling effectiveness-Part II: Compound angle shaped holes: GT2017-64624, (2017)
  • [9] Yao Y., Zhang J.Z., He F., Et al., Numerical investigation on film cooling effectiveness of converging slot hole at turbine blade suction surface, Acta Aeronautica et Astronautica Sinica, 31, 6, pp. 1115-1120, (2010)
  • [10] Ding Y., Chang H.P., Du Z.N., Investigation on characteristics of multiple rows of opposite lateral ejection angle film cooling, Acta Aeronautica et Astronautica Sinica, 34, 11, pp. 2472-2481, (2013)
123