Free vibration analysis of a cracked elastically supported beam

被引：1

作者：

Chettah M. ^{[1
]}

Lassoued R. ^{[1
]}

机构：

[1] Laboratory of Materials and Durability of Constructions (LMDC), Department of Civil Engineering, Faculty of Science and Technology, University of Mentouri

来源：

International Journal of Vehicle Noise and Vibration | 2019年 / 15卷 / 01期

关键词：

Cracked beam; Elastic bearing; Rayleigh's method; Rotational spring; Transfer matrix method; Vibration;

D O I：

10.1504/IJVNV.2019.102150

中图分类号：

学科分类号：

摘要：

In this paper, closed-form expressions based on the Rayleigh's method is studied theoretically to evaluate the first two mode shapes and fundamental frequencies of a cracked elastically supported beam. Such a problem has not been very well investigated in the literature. The Euler-Bernoulli beam theory is employed to model the cracked beam and the crack is represented as a rotational spring. Some numerical examples are given to illustrate the proposed method and to present the effect of cracks on the natural frequencies and mode shapes of this cracked system. The results are compared with analytical, numerical and previous experimental studies. It is found that the present method is simpler in application, decreases the time and cost of computations, and shows a good promise for further development as a practical method to minimise the difference between measured and calculated results; also it can be an alternative solution in the case of crack identification for elastically supported beams. Copyright © 2019 Inderscience Enterprises Ltd.

引用

页码：1 / 20

页数：19

共 45 条

[1]

Abu Husain N., Haddad Khodaparast H., Ouyang H., FE model updating of welded structures for identification of defects, International Journal of Vehicle Noise and Vibration, 6, 2-4, pp. 163-175, (2010)

[2]

Altunisik A.C., Okur F.Y., Kahya V., Automated model updating of multiple cracked cantilever beams for damage detection, Journal of Constructional Steel Research, 138, pp. 499-512, (2017)

[3]

Altunisik A.C., Okur F.Y., Kahya V., Modal parameter identification and vibration based damage detection of a multiple cracked cantilever beam, Engineering Failure Analysis, 79, pp. 154-170, (2017)

[4]

Altunisik A.C., Okur F.Y., Kahya V., Structural identification of a cantilever beam with multiple cracks: Modeling and validation, International Journal of Mechanical Sciences, 130, pp. 74-89, (2017)

[5]

Altunisik A.C., Okur F.Y., Kahya V., Vibrations of a box-sectional cantilever timoshenko beam with multiple cracks, International Journal of Steel Structures, pp. 1-15, (2018)

[6]

Altunisik A.C., Okur F.Y., Karaca S., Kahya V., Vibration-based damage detection in beam structures with multiple cracks: Modal curvature vs. modal flexibility methods, Nondestructive Testing and Evaluation, 34, 1, pp. 33-53, (2019)

[7]

Aminpour H., Nazari F., Baghalian S., Applying artificial neural network and wavelet analysis for multiple cracks identification in beams, International Journal of Vehicle Noise and Vibration, 8, 1, pp. 51-59, (2012)

[8]

Attar M., A transfer matrix method for free vibration analysis and crack identification of stepped beams with multiple edge cracks and different boundary conditions, International Journal of Mechanical Sciences, 57, 1, pp. 19-33, (2012)

[9]

Bakhtiari-Nejad F., Khorram A., Rezaeian M., Analytical estimation of natural frequencies and mode shapes of a beam having two cracks, International Journal of Mechanical Sciences, 78, pp. 193-202, (2014)

[10]

Caddemi S.A., Calio I., Exact closed-form solution for the vibration modes of the Euler-Bernoulli beam with multiple open cracks, Journal of Sound and Vibration, 327, 3-5, pp. 473-489, (2009)

← 1 2 3 4 5 →