Multi-objective optimal design and analysis of variable leakage flux ipm motors for improve flux-weakening ability

被引:0
|
作者
Liu X. [1 ]
Guo G. [1 ]
Du L. [1 ]
Zhu W. [1 ]
机构
[1] School of Electrical and Automation, Jiangxi University of Science and Technology, Ganzhou
基金
中国国家自然科学基金;
关键词
23;
D O I
10.2528/PIERC21042502
中图分类号
学科分类号
摘要
—In this paper, two variable leakage flux permanent magnet (VLFPM) machines are proposed. The keys are to adopt the rotor with single-layer and double-layer PMs and intentionally create leakage flux paths to extend the operating speed range and increase the machine efficiency. The characteristics of the variable leakage flux of the proposed machines are investigated. In order to improve the performances of the VLFPM machines, the Multi-Objective Genetic Algorithm (MOGA) method is applied for achieving the multi-objective optimizations of variables. Then, the performances of the double-layer permanent magnet variable leakage flux motor (DLPM-VLFM) and the single-layer permanent magnet variable leakage flux motor (SLPM-VLFM) are analyzed and compared with conventional interior PM machine (CIPMM) in detail. The performances mainly include flux linkage and torque, flux-weakening capability and efficiency. Finally, it is shown by analysis and comparison that the DLPM-VLFM can have a wider range of speed and high efficiency. © 2021, Electromagnetics Academy. All rights reserved.
引用
收藏
页码:147 / 160
页数:13
相关论文
共 50 条
  • [41] Flux-adjusting characteristic analysis and optimization design of variable-leakage-flux interior permanent magnet motor
    Liang, Jianwei
    Liu, Dabin
    Liu, Xiping
    Wang, Wenrui
    Zhu, Siting
    IET ELECTRIC POWER APPLICATIONS, 2022, 16 (11) : 1365 - 1377
  • [42] Multi-objective optimisation design of air-cored axial flux PM generator
    Zhu, Jun
    Li, Shaolong
    Song, Dandan
    Han, Qiaoli
    Wang, Jingmei
    Li, Guanghua
    IET ELECTRIC POWER APPLICATIONS, 2018, 12 (09) : 1390 - 1395
  • [43] Optimal Design and Control of a Spoke-Type IPM Motor with Asymmetric Flux Barriers to Improve Torque Density
    Wu, Hao
    Zhao, Wenliang
    Zhu, Gefei
    Li, Min
    SYMMETRY-BASEL, 2022, 14 (09):
  • [44] Multi-objective optimal design and performance analysis of a residential microgrid
    Ghodusinejad, Mohammad Hasan
    Peirov, Setareh
    Yousefi, Hossein
    Astaraei, Fatemeh Razi
    JOURNAL OF ENERGY STORAGE, 2024, 92
  • [45] Multi-objective hierarchical optimisation design and experimental verification of an alterable-magnetic-circuit variable-flux memory machine
    Zhang, Shukuan
    Wang, Fachen
    Zhu, Jingwei
    Zheng, Ping
    Liu, Guangwei
    IET ELECTRIC POWER APPLICATIONS, 2024, 18 (07) : 790 - 800
  • [46] Multi-Objective Topology Optimization of Synchronous Reluctance Motors Using Autoencoder-estimated Flux Barrier Shapes
    Kishi, Masahiro
    Wakao, Shinji
    Murata, Noboru
    Makino, Hiroaki
    Takeuchi, Katsutoku
    Matsushita, Makoto
    IEEJ JOURNAL OF INDUSTRY APPLICATIONS, 2025, 14 (01) : 12 - 19
  • [47] Multi-Objective Topology Optimization of Synchronous Reluctance Motors Using Autoencoder-estimated Flux Barrier Shapes
    Department of Electrical Engineering and Bioscience, Waseda University, 3-4-1 Ohkubo, Shinjuku-ku, Tokyo
    169-8555, Japan
    不详
    183-8511, Japan
    IEEJ J. Ind. Appl., 1 (12-19):
  • [48] Multi-Objective Optimization of a Magnetic Circuit for Magnetic Flux Leakage-Type Non-destructive Testing
    Parra-Raad, Jaime A.
    Roa-Prada, Sebastian
    JOURNAL OF NONDESTRUCTIVE EVALUATION, 2016, 35 (01) : 1 - 12
  • [49] Multi-Objective Optimization of a Magnetic Circuit for Magnetic Flux Leakage-Type Non-destructive Testing
    Jaime A. Parra-Raad
    Sebastián Roa-Prada
    Journal of Nondestructive Evaluation, 2016, 35
  • [50] Modelling of squirrel cage induction motors for a bio-inspired multi-objective optimal design
    Contreras, Sergio F.
    Cortes, Camilo A.
    Guzman, Maria A.
    IET ELECTRIC POWER APPLICATIONS, 2017, 11 (04) : 512 - 523