RESEARCH ON MAIN GIRDER WEB CONFIGURATION OF BEND-TWIST COUPLING BLADE OF LARGE WIND TURBINE WITH COMPOSITE LAYING

被引：0

作者：

Wang H. ^{[1
]}

Miao W. ^{[1
]}

Zhang L. ^{[1
]}

Li C. ^{[1
,2
]}

Li Z. ^{[1
]}

机构：

[1] School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai

[2] Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering, Shanghai

来源：

Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2023年 / 44卷 / 03期

关键词：

bend-twist coupling; composite materials; static analysis; structural design; wind turbine blades;

D O I：

10.19912/j.0254-0096.tynxb.2021-0553

中图分类号：

学科分类号：

摘要：

In order to explore the effect of web deflection on modal，strength and buckling characteristics of the bend twist coupling blade，Taking the blade of NREL 5 MW wind turbine as the research object，the blade CAD model was established based on the secondary development of NX. The blade surface pressure distribution was obtained by CFD method for fluid-structure coupling analysis. The results show that natural frequencies of the bend-twist coupled blade are lower than the conventional. The blade shear stress is less than the conventional blade when the main beam of pressure surface deflects to the leading edge. Conversely the trend of the equivalent stress and strain on the blade surface is the same with the deflection angle. The effect of decreasing range and unloading reduction of load is related to web deflection；The blade tip displacement increases with the increase of web deflection. The deflection of the main beam on the pressure surface to the leading edge can enhance the critical buckling load of the blade，the critical buckling load of each blade is smaller than that of the conventional structure blade when the reverse deflection is applied. © 2023 Science Press. All rights reserved.

引用

页码：29 / 38

页数：9

共 35 条

[1]

MOMENI V., WinDam：a novel airborne wind turbine［J］, Journal of clean energy technologies, 5, 3, pp. 243-247, (2017)

[2]

Research on China’s energy and electricity development plan 2030 and prospects for 2060［R/OL］

[3]

HAYAT K, SUNG K H., A parametric study of skin laminates used in the composite layup of large-scale wind turbine blades［J］, Advanced composite materials, 27, 2, pp. 195-208, (2018)

[4]

VEERS P，, DYKES K，, LANTZ E，, Et al., Grand challenges in the science of wind energy［J］, Science, 366, 6464, pp. 1-9, (2019)

[5]

LI C, Et al., Modern large- scale wind turbine design principle［M］, (2013)

[6]

VAN KUIK G, Et al., Long-term research challenges in wind energy-a research agenda by the european academy of wind energy［J］, Wind energy science, 1, 1, pp. 1-39, (2016)

[7]

KOOIJMAN H J T., Bending- torsion coupling of a wind turbine rotor blade［R］, (1996)

[8]

ZUTECK M., Adaptive blade concept assessment：curved planform induced twist investigation［R］, (2002)

[9]

BARR S M, JAWORSKI J W., Optimization of tow-steered composite wind turbine blades for static aeroelastic performance［J］, Renewable energy, 139, pp. 859-872, (2019)

[10]

WEAVER P M., Structural design of a novel aero elastically tailored wind turbine blade［J］, Thin-walled structures, 95, pp. 7-15, (2015)

← 1 2 3 4 →