Investigation of machinability characteristics on C45 steel with cryogenically treated M2 HSS tool using statistical technique

被引：4
|
作者：
Kumar S. [1 ]
Ahmed M.R. [2 ]
Lokesha M. [3 ]
Manjunath L.H. [1 ]
机构：
[1] School Mechanical Engineering, REVA University, Bangalore
[2] School of Electronics and Communication Engineering, REVA University, Bangalore
[3] Department of Mechanical Engineering, MITE, Moodbidri, Mangalore
来源：
International Journal for Simulation and Multidisciplinary Design Optimization | 2019年 / 10卷
关键词：
Deep cryogenic treatment; Flank wear; Hardness; M2 HSS tool; Machining;
D O I：
10.1051/smdo/2019006
中图分类号：
学科分类号：
摘要：
The machining industries always eye on increasing hardness and reducing the friction at the cutting tool-workpiece interface to reduce flank wear, thereby enhancing the tool life. The present study investigates the effect of deep cryogenic treatment (DCT) on the behavior of M2 HSS tool in turning of C45 medium carbon steel. The tool is double tempered and is tested for hardness and flank wear. The power consumption is also analyzed in the process with a focus on green machining. While Taguchi's L27 orthogonal array (OA) is used to study the main interaction effect of all machining parameters, analysis of variance (ANOVA) and signal to noise (S/N) ratio are used for analysis of experimental outcomes. The study reveals that DCT has enhanced the hardness of HSS tool by 14.9%, while speed and feed were the dominating factors on the flank wear. Microstructure morphology using SEM is also discussed. © 2019 S. Kumar et al., published by EDP Sciences.
引用
收藏
相关论文
共 46 条
  • [21] Optimization of electric discharge machining of M2 tool steel using grey relational analysis
    Purohit, Rajesh
    Rana, R. S.
    Dwivedi, R. K.
    Banoriya, Deepen
    Singh, Swadesh Kumar
    MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 3378 - 3387
  • [22] Surface morphology and mechanical strength of AISI M2 tool steel treated in abnormal glow region of plasma
    Naz M.Y.
    Shukrullah S.
    Ghaffar A.
    Shakir I.
    Ullah S.
    Sagir M.
    Pervaiz M.
    Surface Engineering and Applied Electrochemistry, 2015, 51 (1) : 58 - 64
  • [23] Deep Cryogenic Treatment of AISI M2 Tool Steel and Optimisation o Its Wear Characteristics Using Taguchi's Approach
    Kumar, Satish
    Nagraj, Mohan
    Bongale, Arunkumar
    Khedkar, Nitin
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2018, 43 (09) : 4917 - 4929
  • [24] Additive manufacturing of AISI M2 tool steel by binder jetting (BJ): Investigation of microstructural and mechanical properties
    Choudhari, Amit
    Elder, James
    Mugale, Manoj
    Karki, Sanoj
    Vukkum, Venkata Bhuvaneswari
    Gupta, Rajeev Kumar
    Borkar, Tushar
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 132 : 686 - 711
  • [25] Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques
    Davim, J. Paulo
    Figueira, Luis
    MATERIALS & DESIGN, 2007, 28 (04) : 1186 - 1191
  • [26] Influence of Al2O3-13TiO2 powder on a C45 steel using atmospheric plasma spray process
    Mahu, G.
    Munteanu, C.
    Istrate, B.
    Benchea, M.
    Lupescu, S.
    8TH INTERNATIONAL CONFERENCE ON ADVANCED CONCEPTS IN MECHANICAL ENGINEERING, 2018, 444
  • [27] Investigation of M2 factor influence for paraxial computer generated hologram reconstruction using a statistical method
    Flury, M
    Gérard, P
    Takakura, Y
    Twardworski, P
    Fontaine, J
    OPTICS COMMUNICATIONS, 2005, 248 (4-6) : 347 - 357
  • [28] Experimental and Statistical Investigation of Machinability of AISI D2 Steel Using Electroerosion Machining Method in Different Machining Parameters
    Nas, Engin
    Ozbek, Onur
    Bayraktar, Furgan
    Kara, Fuat
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
  • [29] The Inclusion Characteristics and Mechanical Properties of M2 High-Speed Steel Treated with a Vacuum Carbon Deoxidation Process
    Dai, Yuheng
    Man, Tinghui
    Wang, Zhongliang
    Liu, Yu
    Bao, Yanping
    Wei, Xicheng
    METALS, 2024, 14 (10)
  • [30] Fracture Toughness Determination of Heat Treated AISI D2 Tool Steel Using AE Technique
    Sindi, Cevat Teymuri
    Najafabadi, Mehdi Ahmadi
    Ebrahimian, Seyed Ali
    ISIJ INTERNATIONAL, 2011, 51 (02) : 305 - 312
12345