Effect of annealing time on the microstructure and mechanical properties of aluminum added low-density medium manganese steel

被引：0

作者：

Mohapatra, Sudipta ^{[1
]}

Das, Karabi ^{[1
]}

Das, Siddhartha ^{[1
]}

机构：

[1] Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur,721302, India

来源：

Materials Letters | 2022年 / 318卷

关键词：

Austenite - Manganese steel - Manganese - Aluminum - Plasticity - Density (specific gravity) - Annealing - Manganese alloys - Mechanical stability;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The current investigation reports the influence of annealing time on the microstructure, mechanical properties and mechanical stability of austenite in a thermo-mechanically processed medium-Mn (Fe-3.92Al-6.78Mn-1.34Si-0.18C (wt.%)) steel. The specimen annealed at 750 °C for 60 min has better tensile properties than the 30 and 180 min annealed specimen. The combination of higher austenite fraction, higher transformation ratio of austenite and optimum recrystallized fraction lead to the better tensile properties of 60 min annealed specimen. Further, the lower mechanical stability of austenite promotes the transformation-induced plasticity (TRIP) effect, which improves the ductility of the 60 min annealed specimen. © 2022 Elsevier B.V.

引用

共 50 条

[31] The impact of intercritical annealing temperature on microstructure and mechanical properties of an ultra-low carbon medium manganese heavy steel plates
Yu, S.
Deng, Y. G.
Tao, Z.
Misra, R. D. K.
Yang, Y. P.
METALLURGICAL RESEARCH & TECHNOLOGY, 2024, 121 (06)
[32] Effect of hot rolling temperature on the microstructure and mechanical properties of ultra-low carbon medium manganese steel
Yu, S.
Du, L. X.
Hu, J.
Misra, R. D. K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 731 : 149 - 155
[33] Effect of Annealing on Microstructure and Mechanical Properties of Ultrafine-Grained Low-Carbon Medium-Manganese Steel Produced by Heavy Warm Rolling
Ahmad, Sohail
Lv, Li-Feng
Fu, Li-Ming
Wang, Huan-Rong
Wang, Wei
Shan, Ai-Dang
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2019, 32 (03) : 361 - 371
[34] Effect of Annealing on Microstructure and Mechanical Properties of Ultrafine-Grained Low-Carbon Medium-Manganese Steel Produced by Heavy Warm Rolling
Sohail Ahmad
Li-Feng Lv
Li-Ming Fu
Huan-Rong Wang
Wei Wang
Ai-Dang Shan
Acta Metallurgica Sinica(English Letters), 2019, 32 (03) : 361 - 371
[35] Effect of Annealing on Microstructure and Mechanical Properties of Ultrafine-Grained Low-Carbon Medium-Manganese Steel Produced by Heavy Warm Rolling
Sohail Ahmad
Li-Feng Lv
Li-Ming Fu
Huan-Rong Wang
Wei Wang
Ai-Dang Shan
Acta Metallurgica Sinica (English Letters), 2019, 32 : 361 - 371
[36] Effect of reverse-phase transformation annealing process on the microstructure and mechanical properties of hot-rolled medium manganese steel
Fan, Lifeng
Jia, Liying
Zhao, Yan
IRONMAKING & STEELMAKING, 2020, 47 (07) : 790 - 798
[37] Effect of TMCP on microstructure and mechanical properties of low carbon-manganese steel
School of Materials and Metallurgy, Northeastern University, Shenyang 110004, China
不详
不详
Kang T'ieh, 2006, 11 (53-57):
[38] Microstructure and Mechanical Properties of Low-Density NbTiAlVZr Alloy
Wang Feng
Zheng Xin
Bai Run
Cai Xiaomei
Zhang Xiaoming
Wang Donghui
Li Zhongkui
RARE METAL MATERIALS AND ENGINEERING, 2011, 40 (11) : 1972 - 1975
[39] Effect of intercritical annealing temperature and cooling rate on the microstructure and mechanical properties of low-carbon aluminum killed steel
LIAN Fuliang
LIANG Gaofei
CHEN Hongxing
Baosteel Technical Research, 2016, 10 (04) : 18 - 23
[40] Effect of intercritical annealing and subsequent ageing on the microstructure and mechanical properties of a medium Ni-Mn low carbon steel
Koohdar, Hamidreza
Roshanzadeh, Farshad
Nayebpashaee, Nasim
Jafarian, Hamid Reza
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 3656 - 3666

← 1 2 3 4 5 →