Experimental study the mechanical properties of nano composite materials by using multi-metallic nano powder/epoxy

被引：0

作者：

Abbud L.H. ^{[1
]}

Al-Masoudy M.M.M. ^{[1
]}

Hussien Omran S. ^{[2
]}

Abed A.M. ^{[1
]}

机构：

[1] Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College, Babylon

[2] Energy and Renewable Energies Technology Center, University of Technology

来源：

Materials Today: Proceedings | 2023年 / 80卷

关键词：

Mechanical properties; Nano Aluminum; Nano Titanium; Volume fraction;

D O I：

10.1016/j.matpr.2021.06.395

中图分类号：

学科分类号：

摘要：

The mechanical properties of two commercial epoxides have been investigated in both unfilled and filled with varying the weight fraction of Nano Aluminum powder and Nano Aluminum with Nano Titanium powder. The values of Young's modulus, modulus of rigidity, yield stress, tensile strength, flexural strength have been studied at room temperature to identify the specific influence of Aluminum powder (the particle size for Aluminum powder is less than or equal to 50 nm (d ≤ 50). The weight fraction has different values (equals to 10%, 20% and 30%), and Nano Aluminum with Nano Titanium powder for Aluminum powder, the particle size (d) is less than or equal to 50 nm (d ≤ 50). The weight fraction has different values (equals to 10%, 20% and 30%). Also for Titanium powder, the particle size is less than or equal to 50 nm (d ≤ 50), and the weight fraction is 1% for each different weight fractions of Aluminum powder to epoxy resin. The experimental results obtained from laboratory have been analyzed in order to achieve the best result. It is concluded that Young's modulus and modulus of rigidity increase when the weight fraction for Nano Aluminum powder and Nano Aluminum with Nano Titanium powder increase. © 2021

引用

页码：2495 / 2500

页数：5

共 25 条

[1]

Al-Ajaj I.A., Abd M.M., Jaer H.I., Mechanical properties of micro and nano TiO2/epoxy composites, Int. J. Min. Met. Mech. Eng., 1, (2013)

[2]

Al-Turaif H.A., Eect of nano TiO2 particle size on mechanical properties of cured epoxy resin, Prog. Org. Coat., 6, pp. 241-246, (2010)

[3]

Chatterjee A., Islam M.S., Fabrication and characterization of TiO2–epoxy nanocomposite, Mater. Sci. Eng. A, 487, pp. 574-585, (2008)

[4]

Ng C.B., Schadler L.S., Siegel R.W., Synthesis and mechanical properties of TiO2-epoxy nanocomposites, Nanostruct. Mater., 12, pp. 507-510, (1999)

[5]

Wetzel B., Rosso P., Haupert F., Friedrich K., Epoxy nanocomposites—fracture and toughening mechanisms, Eng. Fract. Mech., 73, pp. 2375-2398, (2006)

[6]

Rostamiyan Y., Fereidoon A., Hamed Mashhadzadeh A., Sci. Eng. Compos. Mater., 22, pp. 591-598, (2015)

[7]

Venkata Ramana G., Padya B., Naresh Kumar R., Prabhakar K.V., Jain P.K., Indian J. Eng. Mater. Sci., 17, pp. 331-337, (2010)

[8]

Fathi M.S.A., J. Southwest Jiaotong University, 55, (2020)

[9]

Nassar A., Nassar E., Nanosci. Nanoeng., 1, pp. 89-99, (2013)

[10]

Rostamiyan Y., Azadi R., Adv. Mech. Eng., 8, pp. 1-16, (2016)

← 1 2 3 →