Preparation of Fe-Ce/Dolomite Catalyst and Its Catalytic Performance of Gasification Biomass

被引：0

作者：

Niu Y. ^{[1
,2
]}

Liu K. ^{[1
]}

Cai Y. ^{[1
]}

Li Y. ^{[1
]}

Wang W. ^{[2
]}

机构：

[1] School of Energy and Environment, Inner Mongolia University of Science and Technology, Baotou

[2] Mining Research Institute, Inner Mongolia University of Science and Technology, Baotou

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2020年 / 51卷 / 04期

关键词：

Biomass gasification; Catalysis; Fe-Ce/dolomite; Pine sawdust;

D O I：

10.6041/j.issn.1000-1298.2020.04.041

中图分类号：

学科分类号：

摘要：

Fe-Ce/dolomite catalyst was prepared by the impregnation method, and the catalyst was characterized by SEM and XRD. The high-temperature water vapor catalytic gasification test was carried out on a self-built fixed-bed gasification furnace test station, and the content of the auxiliary agent was studied. The effect of the gasification temperature and other factors on the gasification characteristics of the water vapor of pine rod and effect of number of times of catalyst on deposition of gas component and catalyst were researched. The experimental results showed that the auxiliary Fe and Ce can be well supported on the dolomite, and the catalyst gasification effect of the assistant content of 8% Fe-2% Ce was good. Fixed the catalytic temperature, and the catalyst was used for making the pine wood rod at different temperatures. In the steam gasification test, when the temperature was increased from 750℃ to 950℃, the gas production rate and hydrogen production rate were increased from 1.05 m3/kg and 31.67 g/kg at 750℃ to 1.56 m3/kg and 65.39 g/kg at 900℃, respectively. Compared with the gasification test without catalyst, the hydrogen production rate was increased by 0.15 m3/kg and 16.27 g/kg, and the hydrogen volume fraction was increased from 39.02% to 46.95%, respectively. The third gasification test of the catalyst was carried out at 800℃. The volume fraction of hydrogen was decreased from 40.34% in the first time to 38.97% in the second time and 34.95% in the third time. The amount of carbon deposition was increased from the first time of 21.55 mg/g to the third time of 31.61 mg/g. © 2020, Chinese Society of Agricultural Machinery. All right reserved.

引用

页码：361 / 366

页数：5

共 25 条

[11] Liao Y., Hydrogen-rich gas production from biomass catalytic gasification over Fe-Ce/olivine catalyst, (2015)
[12] Wang T., Chang J., Lv P., Et al., Novel catalyst for cracking of biomass tar, Energy &Fuels, 19, 1, pp. 22-27, (2005)
[13] Sun Y., Jiang J., Kantarelis E., Et al., Development of a bimetallic dolomite based tar cracking catalyst, Catalysis Communications, 20, 13, pp. 36-40, (2012)
[14] Lei W., Li D., Koike M., Et al., Catalytic performance and characterization of Ni-Fe catalysts for the steam reforming of tar from biomass pyrolysis to synthesis gas, Applied Catalysis A General, 392, 1-2, pp. 248-255, (2011)
[15] Wang H., Investigation on the preparation of FeCe and FeW composite oxides and their performance on selective catalytic reduction of NOx with NH3 , (2017)
[16] Niu Y., Wang Z., Liu K., Et al., Processing optimization of pine rod gasification catalyzed by bentonite/limonite modified dolomite, Transactions of the CSAE, 35, 5, pp. 234-240, (2019)
[17] Nipattummakul N., Ahmed I.I., Kerdsuwan S., Et al., Hydrogen and syngas production from sewage sludge via steam gasification, International Journal of Hydrogen Energy, 35, 21, pp. 11738-11745, (2010)
[18] McCabe R.W., Trovarelli A., Cheminform abstract: forty years of catalysis by ceria: a success story, Cheminform, 47, 37, (2016)
[19] Tian J., Yuan S., Lin Z., Et al., Study of oxygen storage properties and thermal stability on reo modified CeO2-ZrO2 solid solutions, Chemical Research and Application, 5, pp. 543-546, (2000)
[20] Liu Z., Senanayake S.D., Rodrigue Z., Et al., Elucidating the interaction between Ni and CeOx in ethanol steam reforming catalysts: a perspective of recent studies over model and powder systems, Applied Catalysis B Environmental, 197, (2016)

← 1 2 3 →