A study of knowledge management on enhancing the effectiveness of plant life management for nuclear power plants

被引：0
作者：
Tanaka H. [1 ]
Sekimura N. [2 ]
机构：
[1] Institute of Nuclear Technology, Institute of Nuclear Safety System, Inc., 64 Sata, Mihama-cho, Mikata-gun, Fukui
[2] Dept. of Nucl. Eng. and Management, Graduate School of Eng., The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo
来源：
Transactions of the Atomic Energy Society of Japan | 2021年 / 20卷 / 03期
关键词：
Economy; Knowledge; LTO; Management; Nuclear power plant; PLiM; Reliability; Safety;
D O I：
10.3327/taesj.J20.024
中图分类号：
学科分类号：
摘要：
In the long-term energy supply and demand outlook, the energy mix has become a global trend, and nuclear power plants (NPPs) are required to maintain a certain power ratio over a long period in Japan. Under such circumstances and with the energy mix, the long-term operation (LTO) of existing NPPs is attracting attention. LTO requires proper management during the operation period of the NPP, including decommissioning; this is plant life management (PLM). In this study, we will take up PLM, which is an activity performed to realize LTO, give an overview of the current situation in Japan, and present performance indicators to measure its effectiveness. As a result, it becomes clear that a continuous improvement can be observed by adding a time axis to the form of knowledge that has been considered thus far. Furthermore, regarding the reduction in the number of accidental failures, which is the remaining issue related to physical deterioration, technical and organizational aspects will be discussed as countermeasures, and solutions will be presented along with a systematic diagram of knowledge management. © 2021 Atomic Energy Society of Japan, All Rights Reserved.
引用
收藏
页码：106 / 124
页数：18
相关论文
共 27 条
  • [21] Judge C. D., Persaud S. Y., Korinek A., Et al., A recent look at CANDU feeder cracking: high resolution transmission electron microscopy and ELNES, 18th Int. Conf. on Environmental Degradation, (2018)
  • [22] Miura T., Fujii K., Fukuya K., Et al., ICAPP, (2017)
  • [23] Miura T., Fujii K., Fukuya K., Et al., Micro-mechanical investigation for effects of helium on grain boundary fracture of austenitic stainless steel, J. Nucl. Mater, 457, pp. 279-290, (2015)
  • [24] Malikowski H., Wilson B., PWROG Materials Committee, Baffle Former Bolt Overview of Industry Experience, (2016)
  • [25] Smith J. M., Ickes M. R., Burke M. A., Et al., Hot cell testing of type 347 stainless steel baffle-to-former bolts removed from U.S. PWRs, Fontevraud, 9, (2018)
  • [26] JANSI, NUCIA, (1983)
  • [27] Amberge K. J., Davidsaver S., McKinley J., Et al., An update on aging management of PWR reactor internals in U.S. plants, Fontevraud, 9, (2018)
123