Experimental Study on Influence of Convex Platform Constraint on Flow-induced Vibration Characteristic of Fast Reactor Assembly

被引：0

作者：

Zhao Z. ^{[1
]}

Cao Q. ^{[1
]}

Lu D. ^{[1
]}

Du Y. ^{[1
]}

Chen S. ^{[2
]}

Liu Y. ^{[1
]}

机构：

[1] School of Nuclear Science and Engineering, North China Electric Power University, Beijing

[2] Huaneng-Xiapu Nuclear Power Co., Ltd., Ningde

来源：

Liu, Yu | 2005年 / Atomic Energy Press卷 / 55期

关键词：

Fast reactor assembly; Flow-induced vibration; Influence of convex platform constraint; Natural frequency;

D O I：

10.7538/yzk.2020.youxian.0857

中图分类号：

学科分类号：

摘要：

The collision of assemblies caused by flow-induced vibration and the fatigue damage caused by continuous fluid erosion threaten the safety of the reactor core. Therefore, it is necessary to study and evaluate the flow-induced vibration behavior of fast reactor assemblies. The uncertainty of vibration characteristics of assembly can be brought by either method with or without fixed convex platform constraint. In order to study the influence of convex platform constraints on the flow-induced vibration characteristics of fast reactor assembly, and quantitatively evaluate the influence of the presence or absence of convex platform constraints on component uncertainty, the flow-induced vibration characteristics of the assembly under two constraints, free upper end of the assembly and fixed convex platform constrains with 0.3 mm gap, were studied by experimental method in this paper. The experimental results show that the assembly has a relative deviation of 6.1% in maximum amplitude RMS with or without a fixed convex platform constraint, for the amplitude of the measuring point closest to the convex platform constraint, the relative deviation of the maximum amplitude RMS with or without boss constraint is 17.4%. The experimental result has some reference value for the analysis and evaluation of the flow-induced vibration behavior of assembly under such complex support conditions. © 2021, Editorial Board of Atomic Energy Science and Technology. All right reserved.

引用

页码：2005 / 2012

页数：7

共 16 条

[1]

(2018)

[2]

LAI Jiang, YANG Jie, XI Zhide, Et al., Analysis of flow-induced vibration of nuclear reactor internals, Nuclear Power Engineering, 37, S2, pp. 28-31, (2016)

[3]

HUO Zhuo, ZHANG Kefeng, XIONG Zhenqin, Et al., Experimental investigation of flow induced vibration of multi-span straight tube bundle with large gap AVB support, Atomic Energy Science and Technology, 54, 7, pp. 1214-1220, (2020)

[4]

(2004)

[5]

ZHANG Xiaoling, LI Tianyong, MA Jianzhong, Et al., Test studies of flow induced vibration for fuel assemble, Nuclear Power Engineering, 37, S2, pp. 44-46, (2016)

[6]

ZHANG Xiaoling, LIU Huantong, YANG Jie, Et al., Test studies of flow induced vibration of Co irradiation assembly, Nuclear Power Engineering, 40, S1, pp. 121-124, (2019)

[7]

ZHAI Weiming, ZHOU Ping, CHENG Daoxi, Et al., Flow-induced vibration test on radiation vessel assembly of china experimental fast reactor, Atomic Energy Science and Technology, 49, 11, pp. 1997-2003, (2015)

[8]

CHEN Shuanglong, LU Daogang, MA Yongzhe, Et al., Experimental study on flow-induced vibration characteristics of radiation vessel assembly in China Experimental Fast Reactor, Nuclear Science and Engineering, 40, 4, pp. 703-709, (2020)

[9]

RAMAKRISHNA R, ANADARAJ M, THIRUMALAI M, Et al., Flow induced vibration measurement using ultrasonic technique, International Conference on Sensors and Related Networks, (2009)

[10]

ANANDARAJ M, KUMAR P A, RAMAKRISHNA R, Et al., Flow induced vibration studies on PFBR fuel subassembly, International Conference on Asian Nuclear Prospects, (2010)

← 1 2 →