Experiment on axial compression performance of glass fiber reinforced polymer-walled concrete-filled steel tube columns

被引：0
|
作者：
Cheng J. [1 ]
Qi Y. [1 ]
Xie Z. [1 ]
机构：
[1] College of Civil Engineering, Nanjing Tech University, Nanjing
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2021年 / 38卷 / 06期
关键词：
Bearing capacity; Glass fiber reinforced polymer; Parameter analysis; Rectangular section; Walled concrete-filled steel tube column;
D O I：
10.13801/j.cnki.fhclxb.20200827.001
中图分类号：
学科分类号：
摘要：
In order to study the axial compression performance of glass fiber reinforced polymer (GFRP)-walled concrete-filled steel tube columns, the static axial compression tests were conducted on a group of non-GFRP constrained specimens and two groups of GFRP constrained specimens. According to the test results, a strong and weak constraint model of the wall column was proposed. Based on the twin-shear unified strength theory, the formula was established to calculate the axial compression bearing capacity of the GFRP-walled concrete-filled steel tube columns. Finally, the theoretical results, obtained through the establishment of the finite element model, were compared with the experimental results. And a parametric analysis was used to study the effect of the yield strength of steel and the strength of concrete on the axial compression performance of the new type wall-filled concrete-filled steel tube columns. The results show that the wall-filled concrete-filled steel tube columns eventually fail due to crushing of the concrete, buckling of the steel tube and excessive deformation of the specimens. At the beginning of the second linear section of the specimen, the steel begins to yield and its strength is fully exerted, which demonstrates that GFRP can effectively improve the peak load of the member, however, the ductility has decreased. The results of the theoretical formula are in agreement with the experimental results. The bearing capacity can be improved by increasing the strength of concrete and the yield strength of the steel. Compared with the strength of concrete, the yield strength of steel bars has a greater influence on the bearing capacity. Copyright ©2021 Acta Materiae Compositae Sinica. All rights reserved.
引用
收藏
页码：1825 / 1837
页数：12
相关论文
共 27 条
  • [1] WEI Wei, Research on eccentric compressive behavior of round-ended concrete-filled steel tubular members, (2019)
  • [2] HAO Jiping, SUN Xiaoling, XUE Qiang, Et al., Research and application of green prefabricated steel structure building system, Engineering Mechanics, 34, 1, pp. 1-13, (2017)
  • [3] SUN Xiaoling, HAO Jiping, XUE Qiang, Et al., Experimental study on seismic performance of walled concrete-filled steel tubular columns, Journal of Building Structures, 39, 6, pp. 92-101, (2018)
  • [4] DU Yansheng, Theoretical analysis and experimental study on rectangular concrete-filled steel tube columns using high-strength steel, (2017)
  • [5] WANG Cancan, XIA Zhigang, YE Yin, Et al., Research on the influence of weld quality on concrete-filled steel tube columns, Low Temperature Architecture Technology, 35, 7, pp. 69-71, (2013)
  • [6] YAN Yanxiang, XU Lihua, CAI Heng, Et al., Calculation methods of axial bearing capacity of short square UHPC filled high strength steel tubular columns, Journal of Building Structures, 40, 12, pp. 128-137, (2019)
  • [7] LI Xiaoxia, Experimental study on mechanical behaviour of FRP-strengthend reinforced concrete columns based on the corner radius, Fiber Reinforced Plastics/Composites, 4, pp. 19-22, (2012)
  • [8] XIAO Y, HE W H, CHOI K K., Confined concrete-filled tubular columns, Journal of Structural Engineering, 131, 3, pp. 488-497, (2005)
  • [9] PAN Yi, WU Xiaofei, GUO Rui, Et al., Stress-strain analysis model of FRP confined concrete cylinder with initial stress, China Railway Science, 38, 5, pp. 30-36, (2017)
  • [10] ZHU Chunyang, ZHAO Yinghua, LI Xiaofei, Experimental study on seismic property of concrete filled FRP-steel tube, Acta Materiae Compositae Sinica, 30, 1, pp. 180-186, (2013)
123