Excitation Mechanism of Time-Varying Instantaneous Center of Speed Integrated Gears and Its Torsional Vibration Characteristics

被引：0
|
作者：
Liu D.-W. [1 ,2 ]
Gu D.-D. [1 ]
Ba Y.-B. [1 ]
机构：
[1] College of Mechanical Engineering, Yanshan University, Qinhuangdao, 066004, Hebei
[2] National Engineering Technology Research Center of Cold Rolling Strip Equipment and Technology, Yanshan University, Qinhuangdao, 066004, Hebei
来源：
Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology | 2019年 / 39卷 / 09期
关键词：
Face gear; Noncircular gear; Parametric vibration; Torsional vibration;
D O I：
10.15918/j.tbit1001-0645.2019.09.002
中图分类号：
学科分类号：
摘要：
The speed integrated gear is a new kind of high-efficiency and lightweight transmission component, possessing both of circular and noncircular gear functionalities. Aiming to the special transmission mode, the dynamical characteristics of the new gear pair with the excitation of time-varying instantaneous center was studied. Firstly, the transmission principle of the speed integrated gear was illustrated, getting the change rule of the instantaneous center and the drive ratio equation. Then on the basis of separation of the elastic rotation angle, analyzing time-varying instantaneous center, stiffness, damper and error, the excited mechanism of the instantaneous center on the gear was revealed to build a torsional vibration model. Finally, the vibration feature of the speed integrated gear under different conditions was analyzed based on Runge-Kutta method. The calculation results indicate that the compound excitations of the instantaneous center and the stiffness can lead to complex multi-frequency phenomenon, and the instantaneous center excitation will be more over the stiffness excitation to the torsional vibration with the amplitude increasing of the instantaneous center, becoming the primary cause of the torsional vibration. © 2019, Editorial Department of Transaction of Beijing Institute of Technology. All right reserved.
引用
收藏
页码：887 / 893
页数：6
相关论文
共 7 条
  • [1] Huang K.J., Chen S.C., Komsuoglu H., Et al., Design and performance evaluation of a bio-inspired and single-motor-driven hexapod robot with dynamical gaits, Journal of Mechanisms and Robotics, Transactions of the ASME, 7, 3, (2015)
  • [2] Liu D., Wang G., Ren T., Transmission principle and geometrical model of eccentric face gear, Mechanism and Machine Theory, 109, pp. 51-64, (2017)
  • [3] Liu D., Rer T., Jin X., Meshing theory of speed integration gear, Journal of Mechanical Engineering, 52, 15, pp. 1-7, (2016)
  • [4] Okada M., Takeda Y., Synthesis and evaluation of non-circular gear that realizes optimal gear ratio for jumping robot, Proceedings of IEEE International Conference on Intelligent Robots and Systems, pp. 5524-5529, (2013)
  • [5] Ye B., Zhu H., Yu G., Et al., Dynamics analysis and tests of rotary transplanting mechanism for rice pot-seedling, Transactions of the Chinese Society for Agricultural Machinery, 47, 5, pp. 53-61, (2016)
  • [6] Liu D., Ren T., Ba Y., Et al., Torsional vibration model and its dynamic characteristics for a noncircular gear based on separation of elastic rotating angle, Journal of Vibration and Shock, 35, 23, pp. 228-233, (2016)
  • [7] Chen Z., Mao Y., Shi W., Et al., Research on torsional vibration of powertrain with dual mass flywheel in start-stop conditions, Transactions of Beijing Institute of Technology, 36, 1, pp. 42-47, (2016)
1