Mathematical modelling for prediction of tube hydroforming process using RSM and ANN

被引：0

作者：

Reddy P.V. ^{[1
]}

Reddy B.V. ^{[2
]}

Ramulu P.J. ^{[3
]}

机构：

[1] Department of Mechanical Engineering, JNTU, Ananthapuramu, A.P

[2] Department of Mechanical Engineering, G. Pulla Reddy Engineering College (Autonomous), Kurnool, A.P.

[3] School of Mechanical, Chemical and Materials Engineering, Adama Science and Technology University, Adama

来源：

International Journal of Industrial and Systems Engineering | 2020年 / 35卷 / 01期

关键词：

ANN; Artificial neural network; FEM; Optimisation; RSM; THF; Tube hydroforming;

D O I：

10.1504/IJISE.2020.106848

中图分类号：

学科分类号：

摘要：

Tube hydroforming (THF) is a special manufacturing process used to produce tubular components having applications in aerospace and automotive industries. The present study investigates the effect of process parameters such as coefficient of friction (CF), corner radius (CR) of the die and the axial feeding (AF) of the punch. The bulge ratio and thinning ratio has been evaluated to minimise the defects like bursting, wrinkling and buckling in the tubes. Apart from many parameters, these parameters are chosen to know the effect of each individual parameter on the outcomes namely bulge ratio and thinning ratio. Each factor has varied with three levels and a total of 27 simulations were carried out based on full factorial design. RSM and ANN were applied on the obtained results in order to predict the process parameters effect on the tube hydroforming process. The R-square value of ANN (0.9524 and 0.9517) is much closure to 1 when compared to R-square value of RSM (0.9539 and 0.9509). Copyright © 2020 Inderscience Enterprises Ltd.

引用

页码：114 / 134

页数：20

共 50 条

[1] Mathematical modelling for prediction of mechanical properties of abutilon indicum fibre reinforced composite using RSM and ANN
Krishnudu, D. Mohana
Sreeramulu, D.
Reddy, P. Venkateshwar
INTERNATIONAL JOURNAL OF ENGINEERING SYSTEMS MODELLING AND SIMULATION, 2022, 13 (02) : 111 - 116
[2] Surface roughness prediction modelling for commercial dies using ANFIS, ANN and RSM
Hossain, Shahriar Jahan
Ahmad, Nafis
International Journal of Industrial and Systems Engineering, 2014, 16 (02) : 156 - 183
[3] Prediction of tool chatter in turning using RSM and ANN
Kumar, Shailendra
Singh, Bhagat
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 23806 - 23815
[4] Prediction and analysis of wrinkling in tube hydroforming process
Yuan, Shijian
Tang, Zejun
Liu, Gang
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2011, 40 (3-4) : 296 - 310
[5] Evaluation of Prediction Models of the Microwire EDM Process of Inconel 718 Using ANN and RSM Methods
Oniszczuk-Swiercz, Dorota
Swiercz, Rafal
Michna, Stefan
MATERIALS, 2022, 15 (23)
[6] Electrocoagulation process modelling and optimization using RSM and ANN-GA for simultaneous removal of arsenic and fluoride
Thakur, Aditya
Dharmendra
MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2024, 7 (06) : 5899 - 5914
[7] Biodiesel production from third-generation feedstock: process parameter modelling and optimisation using RSM-ANN approach
Ahmad, Aqueel
Yadav, Ashok Kumar
Hasan, Shifa
INTERNATIONAL JOURNAL OF OIL GAS AND COAL TECHNOLOGY, 2025, 37 (02) : 235 - 254
[8] Modeling and prediction of COD and turbidity removals from dairy wastewaters by Fenton process using RSM and ANN
Kermet-Said, Hadjira
Moulai-Mostefa, Nadji
BIOMASS CONVERSION AND BIOREFINERY, 2024, 14 (07) : 8419 - 8431
[9] Modeling and prediction of COD and turbidity removals from dairy wastewaters by Fenton process using RSM and ANN
Hadjira Kermet-Said
Nadji Moulai-Mostefa
Biomass Conversion and Biorefinery, 2024, 14 : 8419 - 8431
[10] Loading path prediction for tube hydroforming process using a fuzzy control strategy
Li Shu-hui
Yang Bing
Zhang Wei-gang
Lin Zhong-qin
MATERIALS & DESIGN, 2008, 29 (06): : 1110 - 1116

← 1 2 3 4 5 →