Mechanistic interaction of ciprofloxacin on zeolite modified seaweed (Sargassum crassifolium) derived biochar: Kinetics, isotherm and thermodynamics

被引：0

作者：

Atugoda, Thilakshani ^{[1
]}

Gunawardane, Chaminda ^{[2
]}

Ahmad, Mahtab ^{[3
]}

Vithanage, Meththika ^{[1
]}

机构：

[1] Ecosphere Resilience Research Center, Faculty of Applied Sciences, University of Sri Jayewardenepura, Nugegoda, Sri Lanka

[2] National Institute of Post Harvest Management, Jayanthi Mawatha, Anuradhapura, Sri Lanka

[3] Department of Environmental Sciences, Faculty of Biological Sciences, Quaid-i-Azam University, Islamabad,45320, Pakistan

来源：

Chemosphere | 2021年 / 281卷

关键词：

Batch adsorption experiments - Bio chars - Brown seaweed - Electrostatic attractions - Environmental applications - Isotherms and thermodynamics - Kinetic isotherms - Mechanistics - pH range - Slurry method;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Modification of biochar for efficient removal of antibiotics from water could be a valuable approach in the environmental applications. In this study, a brown seaweed (Sargassum crassifolium) was pyrolyzed at 500 °C and the obtained biochar (SWBC) was modified with zeolite through the slurry method maintaining the ratio at 1:5 (zeolite: biochar) (SWBC-Z). Batch adsorption experiments were conducted to evaluate the adsorption tendency of SWBC and SWBC-Z for the removal of ciprofloxacin (CPX) from water via pH edge, kinetics, isotherm and thermodynamic experiments. The highest adsorption was in the pH range of 6.5–8, supported by the electrostatic attractions and hydrogen bonding with zwitterionic CPX. Experimental kinetics data was well-fitted to the pseudo-second-order and Elovich models (R2 of 0.992 and 0.976, respectively), while the Langmuir and Freundlich isotherm models best described the isotherm data (R2 of 0.954 and 0.976, respectively). The maximum adsorption capacity of 93.65 mg g−1 was recorded for the SWBC-Z. The models predicted chemisorption and physisorption interactions on the heterogenous biochar surface. Well-defined peaks of silanol groups in the FTIR spectrum of SWBC-Z and its electron microscopy confirmed the incorporation of zeolite minerals. Post adsorption FTIR analysis elucidated the changes in the surface functional groups of the SWBC-Z. Thermodynamic data revealed spontaneous and exothermic reaction between CPX and both the biochars. It was concluded that modification of pristine biochar with zeolite imparted greater surface area and additional active sites, which subsequently enhanced the overall CPX adsorption by the SWBC-Z. © 2021 Elsevier Ltd

引用