Research on Movement Stability of Omni-directional Mobile Robot Based on Neural Network

被引:0
作者
Ye C. [1 ]
Zhang S. [1 ]
Yu S. [1 ]
Jiang C. [1 ]
机构
[1] School of Mechanical Engineering, Shenyang Aerospace University, Shenyang
来源
Jiqiren/Robot | 2019年 / 41卷 / 04期
关键词
BP (backpropagation) neural network; Motion stability; Omnidirectional mobile robot; Trajectory accuracy;
D O I
10.13973/j.cnki.robot.180492
中图分类号
学科分类号
摘要
The omnidirectional mobile robot with 3-degree-of-freedom in the plane has high flexibility and can be also applied in crowded and narrow environment. The BP (backpropagation) neural network method is used to solve the problems of the vibration phenomena and trajectory error of the MY2 wheel developed in the laboratory during movement. According to the structure and movement characteristics of the robot, the BP neural network model is established and the parameters of the BP neural network are optimized. Trajectory simulation experiments based on the BP neural network model are conducted. The impact of initial values, different speeds and different trajectories on model are analyzed. The consequence shows that the method based on the suitable BP neural network can keep the trajectory error within the range of 3 mm and the deflection angle error less than 3℃, so the BP neural network can decrease the robot vibration and improve the trajectory accuracy. The universal applicability of the BP neural network model is verified by inputting different motion trajectories, and the correctness of simulation results are validated by experiments in the end. © 2019, Science Press. All right reserved.
引用
收藏
页码:443 / 451
页数:8
相关论文
共 17 条
  • [1] Zhao D.B., Yi J.Q., Deng X.Y., Structure and kinematic analysis of omni-directional mobile robots, Robot, 25, 5, pp. 394-398, (2003)
  • [2] Zhao D.B., Yi J.Q., Introduction to Omni-Directional Mobile Robot, pp. 3-11, (2010)
  • [3] Ren C., Ma S.G., Trajectory tracking control of an omnidirectional mobile robot with friction compensation, IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 5361-5366, (2016)
  • [4] Byun K.S., Song J.B., Design and construction of continuous alternate wheels for an omnidirectional mobile robot, Journal of Field Robotics, 20, 9, pp. 569-579, (2010)
  • [5] Bae J.J., Kang N., Design optimization of a Mecanum wheel to reduce vertical vibrations by the consideration of equivalent stiffness, Shock and Vibration, (2016)
  • [6] Fern'Andez C.A.P., Cerqueira J.F., Lima A.M.N., Control of wheeled mobile robots singularly perturbed by using the slipping and skidding variations: Curvilinear coordinates approach (Part I), IFAC Papersonline, 48, 19, pp. 94-99, (2015)
  • [7] Conceicao A., Modeling of a three wheeled omnidirectional robot including friction models, IFAC Papersonline, 45, 22, pp. 7-12, (2012)
  • [8] Ren C., Ma S.G., Analysis and control of an omnidirectional mobile robot, 44th IEEE International Symposium on Robotics, pp. 1-6, (2013)
  • [9] Ye C.L., Ma S.G., Hui L., An omnidirectional mobile robot, Science China: Information Sciences, 41, 2, pp. 181-189, (2011)
  • [10] Muir P.F., Neuman C.P., Kinematic modeling of wheeled mobile robots, Journal of Robotic Systems, 4, 2, pp. 281-340, (1987)