A novel control scheme for pwm boost converter based on sliding mode control using particle swarm optimization

被引：0

作者：

Liu G. ^{[1
]}

Qiu D. ^{[1
]}

Wang X. ^{[1
]}

Zhang K. ^{[1
]}

Huang H. ^{[1
]}

Wang K. ^{[2
]}

机构：

[1] State Grid Suqian Power Supply Company, Suqian

[2] Wiscom System Co., LTD, Nanjing

来源：

Recent Patents on Engineering | 2021年 / 15卷 / 05期

关键词：

Boost converter; ISE; ITAE; Nonlinear control; Particle Swarm Optimization (PSO); Sliding mode control;

D O I：

10.2174/1872212114999200824110203

中图分类号：

学科分类号：

摘要：

Background: The PWM Boost converter is a strongly nonlinear discrete system, espe-cially when the input voltage or load varies widely, therefore, tuning the control parameters of which is a challenge work. Objective: In order to overcome the issues, Particle Swarm Optimization (PSO) is employed for tuning the parameters of a sliding mode controller of a boost converter. Methods: Based on the analysis of the Boost converter model and its non-linear characteristics, a mathematic model of a boost converter with a sliding mode controller is built firstly. Then, the parameters of the Boost controller are adjusted based on the Integrated Time and Absolute Error (ITAE), Integral Square Error (ISE) and Integrated Absolute Error (IAE) indexes by PSO. Results: Simulation verification was performed, and the results show that the controllers tuned by the three indexes all have excellent robust stability. Conclusion: The controllers tuned by ITAE and ISE indexes have excellent steady-state perfor-mance, but the overshoot is large during the startup. The controller tuned by the IAE index has better startup performance and slightly worse steady-state performance. © 2021 Bentham Science Publishers.

引用

共 13 条

[1]

Chan C.Y., A nonlinear control for dc–dc power converters, IEEE Transactions on Power Electronics Pe, 22, 1, pp. 216-222

[2]

Tan S. C., Lai Y. M., Tse C. K., A fast-response sliding-mode controller for boost-type converters with a wide range of operating conditions, IEEE Transactions on Industrial Electronics, 54, 6, pp. 0-3286

[3]

Tan S., Lai Y., Tse C., Sliding mode control of switching power converters: techniques and implementation, IEEE Industrial Electronics Magazine, 38, 2-3, pp. 203-213, (2012)

[4]

Wai R. J., Shih L. C., Design of voltage tracking control for dc–dc boost converter via total sliding-mode technique, IEEE Trans. Ind. Electron, 58, 6, pp. 2502-2511, (2011)

[5]

Sreekumar C., Agarwal V., A hybrid control algorithm for voltage regulation in dc–dc boost converter, IEEE Trans. Ind. Electron, 55, 6, pp. 2530-2538, (2008)

[6]

Wai R. J., Shih L. C., Adaptive fuzzy-neural-network design for voltage tracking control of a dc–dc boost converter, IEEE Trans. Power Electron, 27, 4, pp. 2104-2115

[7]

Wang Y. X., Yu D.H., Kim Y.B., Robust time-delay control for the dc–dc boost converter, IEEE Trans. Ind. Electron, 61, 9, pp. 4829-4837, (2015)

[8]

Son Y. I., Kim I. H., Complementary PID controller to pas-sivity-based nonlinear control of boost converters with inductor re-sistance, IEEE Trans. Contr. Syst. Technol, 20, 3, pp. 826-834

[9]

Hwu K. I., Yau Y. T., Performance enhancement of boost converter based on PID controller plus linear-to-nonlinear transla-tor, IEEE Trans. Power Electron, 25, 5, pp. 1351-1361, (2010)

[10]

He J.B., Wang Q.G., Lee T.H., P. I/PID controller tuning via LQR approach, Chem. Eng. Sci, 55, 13, pp. 2429-2439, (2000)

← 1 2 →