Loop test study on the high-concentration cemented filling of full tailings

被引:0
|
作者
Wang H.-J. [1 ]
Wang X.-L. [1 ]
Kou Y.-P. [1 ,2 ]
Wu Z.-H. [1 ,2 ]
Peng Q.-S. [1 ]
机构
[1] School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing
[2] Backfilling Engineering Laboratory of Shandong Gold Group Co., Ltd., Laizhou
关键词
Full tailings; High-concentration filling; Loop test; Pipe resistance; Rheological parameters;
D O I
10.13374/j.issn2095-9389.2020.01.09.002
中图分类号
学科分类号
摘要
The high-concentration slurry prepared from full tailings used for mine backfilling can effectively eliminate the disasters caused by underground voids and tailing ponds. Using pipelines to transport filling slurry is the most efficient way, and the pipe resistance is one of the most important parameters. Presently, the loop test method for studying the pipe transportation parameters of filling slurry is closest to engineering reality. To determine the influence of the cement-sand ratio, concentration, and flow velocity of the high-concentration filling slurry prepared from full tailings on the pipe resistance and predict the resistance of industrial filling pipelines, pilot-scale loop tests were performed. A pipe resistance prediction model was established based on the relationship between the shear stress and the shear rate at the pipe wall. The gray correlation method was used to analyze the influence of various factors on the pipe resistance, and the rheological parameters of filling slurry were obtained by linear regression. The results show that the pipe resistance is most sensitive to the mass concentration of filling slurry and increases quadratically. The flow velocity of filling slurry has the second-greatest effect on pipe resistance, and the resistance increases linearly with flow velocity in laminar flow. The cement-sand ratio of filling slurry has a dual effect on the pipe resistance. When the cement-sand ratio is less than 1:8, the cohesion effect of the cementing material is dominant and increases the pipe resistance. On the contrary, the lubrication effect of the cementing material is dominant and reduces the pipe resistance. The rheological parameters of filling slurry obtained by the loop test are much smaller than those obtained by the rheometer, and the loop test method is more reliable. The error of the pipe resistance prediction model is within 10%. Copyright ©2021 Chinese Journal of Engineering. All rights reserved.
引用
收藏
页码:215 / 222
页数:7
相关论文
共 26 条
  • [1] Karen Hudson-Edwards, Wang K, Yang P, Karen H E, Et al., Status and development for the prevention and management of tailings dam failure accidents, Chin J Eng, 40, 5, (2018)
  • [2] Liu X H, Wang G L, Zhao Z B, Et al., Study on the flow resistance characteristics of structure fluid backfilling slurry based on loop pipe testing, China Molybdenum Ind, 40, 5, (2016)
  • [3] Yang C, Guo L J, Zhang L, Et al., Study of the rheological characteristics of copper tailings and calculation of resistance in pipeline transportation, Chin J Eng, 39, 5, (2017)
  • [4] Yang Z Q, Wang Y Q, Gao Q, Et al., Pipe-loop test for transportation characteristics of paste in Jinchuan mine and corresponding drag reduction technology, Min Metall Eng, 36, 5, (2016)
  • [5] Wu A X, Ruan Z E, Wang Y M, Et al., Simulation of long-distance pipeline transportation properties of whole-tailings paste with high sliming, J Cent South Univ, 25, 1, (2018)
  • [6] Wang S Y, Wu A X, Yin S H, Et al., Influence factors of pressure loss in pipeline transportation of paste slurry, Chin J Eng, 37, 1, (2015)
  • [7] Li J, Xiao C C, Jiang J, Et al., Thixotropic properties of paste pumping effect on pipeline resistance, China Min Mag, 26, 2, (2017)
  • [8] Liu X H., Macro-micro analysis and test method of rheological behavior of paste tailings, Met Mine, 5, (2018)
  • [9] Liu X H, Wu A X, Yao J, Et al., Resistance characteristic and approximate calculation of paste tailings slip flow inside pipe, Chin J Nonferrous Met, 29, 10, (2019)
  • [10] Chen Q S, Zhang Q L, Wang X M, Et al., Pipeline hydraulic gradient model of paste-like unclassified tailings backfill slurry, J China Univ Min Technol, 45, 5, (2016)