Preparation and Characterization of Ionic Polymer-Metal Composite Based on Sulfonated Polyimide

被引：0
|
作者：
Li Y. [1 ]
Wang X. [2 ]
Gao L. [3 ]
Jin R. [3 ]
机构：
[1] Experiment Center, Jilin Business and Technology College, Changchun
[2] Hulunbuir Bureau of Education, Hulunbuir
[3] Polymer Composites Engineering Laboratory, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun
来源：
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering | 2019年 / 35卷 / 04期
关键词：
Electro-active polymer; Ionic polymer-metal composite; Sulfonated polyimide;
D O I：
10.16865/j.cnki.1000-7555.2019.0115
中图分类号：
学科分类号：
摘要：
The ionic polymer metal composites (IPMC) based on suofonated polyimide were pre pared and the performances of the new IPMC were tested. Scanning electron micros copes show that the metals platinum and silver are well adhesion with the sulfonated polyimide substrate, the thickness of the metal layer is 12 μm. The water uptake, surface resistance and electric braking performance of the IPMC materials were tested. Experimental results show that the water uptake of based on SPI is obvious higher than of based on Nafion, compared with traditional Nafion as base material of IPMC materials, the IPMC based on SPI shows a much larger tip displacement, and a stronger sensitivity. These data show that sulfonated polyimide is an ideal material to substitute Nafion membrane as the IPMC base material. © 2019, Editorial Board of Polymer Materials Science & Engineering. All right reserved.
引用
收藏
页码：142 / 145
页数：3
相关论文
共 12 条
  • [1] Poncet P., Casset F., Latour A., Et al., Development of haptic button based on electro active polymer actuator, Proced. Eng., 168, pp. 1500-1503, (2016)
  • [2] Qi X.M., Zong Z.J., Zheng S.S., Uniaxial extension and material parameters of nonlinear electroactive dielectric elastomer strain-energy modeling, Polymer Materials Science & Engineering, 28, 3, pp. 165-169, (2012)
  • [3] Tang J.G., Hu K.A., Liu H.Y., Et al., Relationship between the preparation of polymer-metal solution and the morphological structure of polymer-metal gradient composite film, Polymer Materials Science & Engineering, 15, 5, pp. 66-68, (1999)
  • [4] Yu F., Bilberg A., Xiao L., Et al., Foot edema simulation and monitoring using dielectric electroactive polymer sensors, Sens. Actuators, A, 225, pp. 33-40, (2015)
  • [5] Esmaeli E., Ganjian M., Rastegar H., Et al., Humidity sensor based on the ionic polymer metal composite, Sens. Actuators, B, 247, pp. 498-504, (2017)
  • [6] Ryu T., Sutradhar C., Ahmed F., Synthesis and characterization of sulfo nated mutiphenyl conjugated polyimide for PEMFC, J. Ind. Eng. Chem., 49, pp. 99-104, (2017)
  • [7] Yao H., Shi K., Song N., Et al., Polymer electrolyte menbranes based on cross-linked highly sulfonated co-polyimides, Polymer, 103, pp. 171-179, (2016)
  • [8] Guo X., Li W., Fang J., Et al., Synthesis and properties of novel multiblock copolyimides consisting of benzimidazole-groups-containing sulfonated polyimide hydrophilic blocks and non-sulfonated polyimide hydrophobic blocks a s proton exchange membraned, Electrochim. Acta, 177, pp. 151-160, (2015)
  • [9] Miyatake K., Furuya H., Tanaka M., Et al., Durability of sulfonated polyimide membrane in humidity cycling for fuel cell applications, J. Power Sources, 204, pp. 74-78, (2012)
  • [10] Fang J., Guo X., Xu H., Et al., Sulfonated polyimides: synthesis, proton conductivity and water stability, J. Power Sources, 159, pp. 4-11, (2006)
12