Research on thermal stratification of surge line in the marine reactor based on fluid-solid thermal coupling model

Due to the requirements of ship movement, the power of the marine reactor is constantly changing, and the expansion and contraction of the primary coolant make the fluid flow in and out through the surge line. This paper establishes a fluid-solid thermal coupling model for the thermal stratification of a Marine reactor surge line. The low Reynolds number eddy viscosity model and the curvature modification of the bending pipe are used in this model. Qiao experiment is provided to verify the model's applicability to the thermal stratification analysis. The typical working conditions of the Marine reactor are analyzed, and the results show that: the temperature difference between the top and bottom of the pipe changes constantly with the fluctuation of the fluid, the maximum temperature difference in the horizontal section is 59.6 K, and the maximum temperature difference in the vertical area is 23.9 K. The maximum stress fluctuation of the horizontal section is 36 MPa, while that of the vertical section is 5 MPa. In the non-destructive testing, many small pits were found in the horizontal section of the pipeline, while no obvious damage was found on the surface of the vertical section, which is consistent with the results of our numerical analysis. © 2024