Conjugate heat and mass transfer on steady mhd mixed convection flow along a vertical slender hollow cylinder with heat generation and chemical reaction effects

被引：2
作者：
Saidoune F. [1 ]
Bouaziz M.N. [1 ]
Aziz A. [2 ]
机构：
[1] Biomaterials and transport phenomena laboratory, University of Medea
[2] Department of Mechanical Engineering, School of Engineering and Applied Science, Gonzaga, University, Spokane, 99258, WA
来源：
Defect and Diffusion Forum | 2021年 / 406卷
关键词：
Chemical reaction; Heat generation; MHD flow; Mixed convection; conjugate heat transfer; Vertical slender hollow cylinder;
D O I：
10.4028/www.scientific.net/DDF.406.53
中图分类号：
学科分类号：
摘要：
This paper studies the effects of heat generation and chemical reaction on the coupled conjugate heat and mass transfer by MHD laminar mixed convective flow along a vertical slender hollow cylinder. The governing boundary layer equations along with the boundary conditions are first cast into a dimensionless form by a non similar transformation and the resulting equations are then solved by the finite difference method using Matlab@ following the code bvp4c. Numerical results of the velocity, temperature and concentration for different values of the conjugate heat transfer parameter p, the magnetic parameter M, the heat generation Q, and the chemical reaction K are studied. The local skin friction, Nusselt number and Sherwood number are also analyzed and presented graphically. In the numerical ranges of the main parameters, it is found mainly that working with strong conjugate heat transfer or/and all others parameters affects negatively the Nusselt and Sherwood numbers. The same trend is revealed for the skin friction factor. © 2021 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：53 / 65
页数：12
相关论文
共 35 条
  • [1] Hussein A.K, Mixed Convection in Cylinders-A Comprehensive Overview and Understanding, J. Basic. Appl. Sci. Res, 3, 10, pp. 328-338, (2013)
  • [2] Sparrow E.M, Gregg J.L, Laminar free convection heat transfer from the outer surface of a vertical circular cylinder, TRANS. ASME, 78, pp. 1823-1829, (1956)
  • [3] Chen T.S, Mucoglu A., Buoyancy effects on forced convection along a vertical cylinder, ASME J. Heat Transfer, 97, pp. 198-203, (1975)
  • [4] Mucoglu A., Chen T.S, Buoyancy effects on forced convection along a vertical cylinder with uniform surface heat flux, ASME J. Heat Transfer, 98, pp. 523-525, (1976)
  • [5] Hussein A.K, Hussain S.H, Mixed convection heat transfer in a differentially heated square enclosure with a conductive rotating circular cylinder at different vertical locations, International Communications in Heat and Mass Transfer, 38, pp. 263-274, (2011)
  • [6] Sivasankaran S., Sivakumar V., Hussein A.K, Numerical study on mixed convection in an inclined lid-driven cavity with discrete heating, International Communications in Heat and Mass Transfer, 46, pp. 112-125, (2013)
  • [7] Sivasankaran S., Sivakumar V., Hussein A.K, Prakash P., Mixed Convection in a Lid-Driven Two-Dimensional Square Cavity with Corner Heating and Internal Heat Generation, Numerical Heat Transfer, Part A: Applications, An International Journal of Computation and Methodology, 65, 3, pp. 269-286, (2014)
  • [8] Hussein A.K, Hussain S.H, Characteristics of magnetohydrodynamic mixed convection in a parallel motion two-sided lid-driven differentially heated parallelogrammic cavity with various skew angles, Journal of Thermal Engineering, V1, 3, pp. 221-235, (2015)
  • [9] Saha S., Hussein A.K, Saha G., Hussain S.H, Mixed convection in a tilted Lid-Driven square enclosure with adiabatic cylinder at the center, Heat and Technology, 29, (2011)
  • [10] Hussein A.K, Hussain S.H, Mixed convection through a Lid-driven air-filled square cavity with a hot wavy wall, International Journal of Mechanical and Materials Engineering, 5, 2, pp. 222-235, (2010)
1234