Multi-material Printing of Direct Ink Writing: a State of the Art Review

被引：0
作者：
Zhang J. [1 ]
Zhou J. [2 ]
Duan G. [1 ]
机构：
[1] School of Mechanical Engineering, Hebei University of Technology, Tianjin
[2] College of Mechanical Engineering, Tianjin University of Science and Technology, Tianjin
来源：
Cailiao Daobao/Materials Reports | 2022年 / 36卷 / 08期
关键词：
Additive manufacture; Direct ink writing; Functionally graded material printing; Material mixed printing; Mixed material printing;
D O I：
10.11896/cldb.20080135
中图分类号：
学科分类号：
摘要：
As a widely used process and method in additive manufacturing technology, direct ink writing has the advantages of low equipment cost, high material utilization rate, simple operation process, low energy requirement and environmental friendliness. In recent years, direct ink writing technology has become one of the research hotspots of additive manufacturing technology. This paper introduces the mechanism and advantages of direct ink writing technology, from the three aspects of mixed material printing, material mixed printing and functionally graded material printing, elaborates the application of direct ink writing technology in biomedicine, construction engineering, energetic materials and food engineering, etc., and summarizes the technical difficulties and key issues of printing methods of different materials.It also discusses the challenges and the future development trend of direct ink writing technology. © 2022, Materials Review Magazine. All right reserved.
引用
收藏
相关论文
共 63 条
[1]  
Li Q, Li B, Zhou J, Et al., Journal of Inorganic Materials, 1, (2005)
[2]  
Sun Y H, Peng C Q, Wang X F, Et al., Chinese Journal of Nonferrous Metals, 25, 6, (2015)
[3]  
Wang S Y, Li S J, Tu Y Y, Et al., Chinese Journal of New Drugs, 29, 8, (2020)
[4]  
Ghidini T., Journal of Thoracic Disease, 10, 20, (2018)
[5]  
Nadagouda M N, Rastogi V, Ginn M., Current Opinion in Chemical Engineering, 28, (2020)
[6]  
Zhang X, Zhang Y., Cell Biochem Biophys, 72, 3, (2015)
[7]  
Cesarano J, Segalman R, Calvert P., Ceramics Industry, 148, 4, (1998)
[8]  
Liu C Q, Wang H X, Li Z, Et al., Chinese Journal of Experimental Formulae, 26, 3, (2020)
[9]  
Kabir S M, Mathur K, Seyam A M., Composite Structures, 232, (2020)
[10]  
Cheng K, Lan H B, Zou S T, Et al., Science in China: Science of Technology, 47, 2, (2017)
1234567